SSV Works Announces Plug-&-Play Subwoofer Kits for Select Polaris Models

OXNARD, CA (08.15.23) – SSV Works has  announced new plug-&-play subwoofer add-on kits for select Polaris models with Ride Command. Now available with an MSRP of $999.99, the three updated kits now include a 10-inch SSV Works V-Series subwoofer.

“With a thumping 1,000 Watt MAX (500 Watt RMS) SSV Works V-Series subwoofer, these kits are a perfect and easy add-on to select Polaris models that come with stock factory audio that don’t include subwoofers,” explained Trevor Kaplan, SSV Works CEO. “Complete with pre-installed subwoofer, subwoofer enclosure, 500-watt Kicker mono amp, and plug-&-play wiring, these SSV Works kits add deep, clean bass to your system and could not be easier to install.”

The new kits are available for the following: 

  • Polaris Ranger w/Ride-Command (RG4-1VRC)
  • Polaris RZR w/Ride-Command (RZ34-1VRC)
  • Polaris RZR Pro Series w/Ride-Command (RZ5-1VRC)

With its convenient plug-&-play solution, no soldering, cutting, or crimping is required. Simply bolt down the subwoofer enclosure, run the wiring, turn the key, and go. It is that simple.

“The kits’ fit and finish make it look as though it came straight from the factory and not stick out like a sore thumb,” Kaplan added. “Trail ready, SSV Works equipment are built with both performance and durability in mind. Mud, dirt, water, or snow, SSV Works audio systems can handle it all.”

For more information, visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.

SSV Works Launches SWITCH Works Alpha12 Digital Smart Switcher

OXNARD, CA (07.07.23) – SSV Works is proud to announce the launch its new brand SWITCH Works. With the launch comes its new Alpha12 weather-proof electronic smart switcher, a plug-and-play solution controlling 12 accessories from the fully programmable LCD touch buttons that can be customized for each individual vehicle or accessory. The patent-pending Alpha12 is now shipping with MSRPs of $1,149.99 (w/ 3-foot power cable) and $1,199.99 (with 10-foot power cable).

“SWITCH Works by SSV Works’ and its new Alpha12 electronic switcher is the first of its kind, featuring 12 fully programmable outputs, solid state electronics, and IP-rated weather-proofing to handle the rigors of truck, Jeep, marine, RV, and UTV/ATV applications, and more,” explained Trevor Kaplan, SSV Works CEO. “Command the Alpha12 outputs with its hyper-bright LCD touch button controller which allows for full customization of the button graphics and easy viewability in direct sunlight. Users can choose any of the 60+ pre-loaded digital icons or upload your own custom image and assign to any button…thus making the need for stickers unnecessary.”

Additionally, the controller’s compact size allows for multiple mounting options. The positive response LCD touch-button displays are programmable for any accessory or combination of accessories for on-road and off-road vehicle applications. Each Alpha12 unit comes with a Universal RAM Mount for multiple mounting options. Optional vehicle-specific mounting kits will be available soon for seamless in-vehicle integration.

“Alpha12 has 170amp total output, six high current and six low current outputs with live amperage readings,” Kaplan continued. “Each output is a configurable option that can be turned on with the ignition off, Ignition whereas the ignition must be on for the accessory to turn on, or Ignition memory…if you turned the vehicle off with the accessory on, the accessory will automatically turn on next time you turn on your vehicle.”

If you need more than 170 total amps, SWITCH Works allows you to easily connect a second brain while keeping one single controller, keeping your dash clutter-free. Controlling from a secondary location is an option by adding a secondary controller to one brain. Output configuration is a breeze…it can be done directly from the Alpha12 controller, or via a computer app.

The weatherproof brain is made from cast aluminum for maximum heat dissipation to increase reliability and off-road durability. All wires utilize waterproof connectors for secure connections to further increase waterproofing and reliability.

“We are very excited to present the Alpha12 to the powersports and off-road enthusiast,” Kaplan concluded. “We are also excited to have more SWITCH Works products in development, and we are looking forward to presenting them to the industry in the months to come.”

For more information, please visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.

SSV Works Announces New Rear Speaker Pods for 2021+ 2-Door Ford Bronco

OXNARD, CA (06.01.23) – SSV Works has announced the launch of the new plug-and-play 6.5-inch rear speaker-pod add-ons for 2021+ 2-door Ford Broncos. Available loaded (p/n BR-2B65A) or unloaded (p/n BR-2B65U), the patent-pending system is now shipping. SSV Works launched the 4-door solution for Ford Bronco 2021+ model years earlier this year.

“The new Broncos have become immensely popular in a short period of time, and we quickly realized its audio system needed an additional audio option,” said Trevor Kaplan, SSV Works CEO. “Designed specifically for the new 2- and 4-door Broncos, our new 6.5-inch rear speaker-pod add-ons provide easy installation in the rear factory roll cage using factory mounting locations. Optimized for sound quality, these pods are weather-proof and resistant to extreme environmental conditions, making them the ideal audio systems when out on the trails or on the beach.”

The loaded pods for 2-door Broncos come with 6.5in., 120 Watt (peak) SSV Works powersports speakers with a 25mm tweeter and weather-proof EPDM dual-lock gasket with an MSRP of $359.99. Pods with included Kicker speakers have an MSRP of $469.99. If you already have the speakers, the unloaded pods have an MSRP of $249.99.

Additional features and specifications include:
• Includes stainless steel hardware, molded grommet, & integrated speaker terminals
• Plug-&-Play harness allows for both factory or external amplifier connectivity
• Dimensions: 19.75in x 11.5in x 8.6in
• Warranty: Limited lifetime warranty of both the pods and the SSV Works speakers

For more information, please visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.

SSV Works Announces New Rear Speaker Pods for 2021+ Ford Bronco

OXNARD, CA (12.05.22) – SSV Works is proud to announce the launch of the new plug-and-play 6.5-inch rear speaker-pod add-ons for 2021+ Ford Broncos. Available loaded (p/n BR-B65A) or unloaded (p/n BR-B65U), the patent-pending system is now shipping.

“The new Broncos have become immensely popular in a short period of time, and we quickly realized its audio system needed an additional audio option,” said Trevor Kaplan, SSV Works CEO. “Designed specifically for the new Broncos, our new 6.5-inch rear speaker-pod add-ons provide easy installation in the rear factory roll cage using factory mounting locations. Optimized for sound quality, these pods are weather-proof and resistant to extreme environmental conditions, making them the ideal audio systems when out on the trails or on the beach.”

The loaded pods come with 6.5in., 120 Watt (peak) SSV Works powersports speakers with a 25mm tweeter and weather-proof EPDM dual-lock gasket with an MSRP of $339.99. If you already have the speakers, the unloaded pods have an MSRP of $229.99.

Additional features and specifications include:
• Includes stainless steel hardware, molded grommet, & integrated speaker terminals
• Plug-&-Play harness allows for both factory or external amplifier connectivity
• Dimensions: 19.75in x 11.5in x 8.6in
• Warranty: Limited lifetime warranty of both the pods and the SSV Works speakers

For more information, please visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.

SSV Works Launches New Website

OXNARD, CA (09.20.22) – SSV Works is proud to announce the launch of the new SSVWorks.com.

“As we have updated and created new and better purchasing abilities for our products, we have rebuilt ssvworks.com from the ground up in order to give our customers the best online experience possible,” said Trevor Kaplan, SSV Works CEO. “Our website now utilizes the Shopify platform, which provides for a better and easier way to buy as well as providing more customer-friendly tools to utilize when browsing and selecting their new audio systems.”

Compared to the past website, the new ssvworks.com has better overall aesthetics, better overall organization and easier navigation for customers, and internal system linking that keeps products consistently up-to-date.

“To make finding product information easier, we’ve included additional features,” Kaplan continued. “Product variations such as speaker enclosures, for example, the SKU on the product page will dynamically change when you select the speaker option and clamp size option. Each product title, description and spec have been updated, along with an added ‘Vehicle Compatibility’ tab, making the process of finding the correct kit much simpler.”

During the purchase process with the new Shopify platform, zero interest financing is now available. Popular payments such as Amazon Pay, Apple Pay, and more are now available, as well.

For more information, please visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.

SSV Works Launches Phase EQ Pre-Tuned Amplifier Solutions

OXNARD, CA (09.16.22) – SSV Works is proud to announce that it now offers Phase EQ™, an amplifier setting the new standard in UTV Audio. Now available, Phase EQ ships with most SSV Works amplified audio kits (MSRP is dependent on kit).

“The DSP technology in our new 800-Watt Phase EQ amp with Rock & Ride™ is the same that is found in luxury cars with premium audio systems,” explained Trevor Kaplan, SSV Works CEO. “The Rock & Ride switch maximizes the way your stereo sounds depending on what you’re doing…whether at camp or on the trail, you can change the pre-tuned DSP of your system with the push of a button. When you’re on either Rock or Ride, each setting comes pretuned specific to the stereo kit and vehicle it’s going in.”

Competitors only set the gains and a few other settings and call it “pretuned”, but they don’t take into account the differences in a UTV’s make and model that can affect audio output like SSV Works’ new Phase EQ solution does.

“For instance, if the amp comes in a RZR kit, the amp will be tuned down to the processing signal, differently than if it comes in a CanAm kit,” Kaplan explained. “This means no matter the ride, the audio is perfectly processed for the ultimate listening experience. Also, because of the way we process the audio, our 800-watt amplifier will outperform higher wattage amplifiers available on the market today.”

The UTV market is all about big power…and power consumption. Unlike other companies in the market, SSV Works’ audio systems are specifically designed for side-by-sides, and so you don’t need to upgrade to a dual-battery setup in order to utilize its full potential with SSV Works solutions. The SSV Works Phase EQ amplifier is also IP66-rated with complete dust and water protection, and with a higher rating than leading competitors, this is the ideal amp for your ride. There are no other systems on the market that can match its performance.

Rock & Ride: The patented switch comes with every Phase EQ amplifier. It fits in your standard rocker-switch location and allows you to switch between multiple audio profiles.

Back at camp? Hit ROCK to switch to a profile tuned for a more optimal sound from outside the vehicle. This provides the fullest sonic and most optimal sound while you’re cracking a cold one by the fire. 

Ready to hit the trail? Select RIDE and the amp will process the audio to compensate for wind and engine noise, as well as boost the frequencies that would be lost from wearing your helmet, achieving the most energized listening experience in the cab while riding.

Additional features include:

  • Power: 50W x 4 @ 4ohm; 100W x 4 @ 2ohm; 400W x 1 @ 2ohm
  • 2ohm Stable Channel
  • Channel 1/2 & 3/4 Bridgeable
  • Low Current Draw (60A max)
  • Rock n’ Ride Switch Included with Amp

“This is the healthiest UTV amp on the market, pulling just the right amount of power while allowing all additional power-hungry accessories to be added without draining the battery unnecessarily,” Kaplan concluded.

For more information, please visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.

SSV Works Exhibiting at the 2021 Rally on the Rocks

MOAB, UT (05.13.2021) – SSV Works is exhibiting at the 2021 Discount Tire Rally on the Rocks from May 12-15 in San Juan County, UT. “It only makes sense, that as a market leader in off-road audio systems and accessories, that we exhibit at one of the biggest events of the year. It’s been quite a year for all of us and so many have taken to the outdoors in record numbers.” Trevor Kaplan, SSV Works CEO, stated.

The SSV Works CanAm Maverick X3 Max on a run down the Behind the Rocks Trail at Rally on the Rocks in Moab Utah.

Continuing, Kaplan offered “SSV Works offers the industry’s only weatherproof Polaris RZR Pro XP full aftermarket audio solution. The 2021 Rally on the Rocks is an ideal occasion to showcase our new and exciting audio kits to thousands of side-by-side enthusiasts.”

Rally on the Rocks is the perfect setting to showcase the latest SSV Works products to thousands of side-by-side enthusiasts.

SSV Works is also participating as a sponsor for the Rally on the Rocks Taco Dinner Night this year. “We feel we need to show our appreciation to the Powersports community for staying strong through the tough times we all have been experiencing,” Kaplan continued. “This is our way to give back to say ‘Thank you’ and offer some amazing audio prize packs for the nights’ raffle. It’s going to be a blast seeing all of our friends after so long!”

Last year SSV Works announced a collaboration with JVC in which SSV Works is now the exclusive Powersports distributor for the KD-MR1BTS marine / powersports digital media receiver. “That success has led us to add this incredible receiver to our XP1000 kits. Our customers asked for an easy plug-and-play upgrade, we listened, and now we have it and all can experience it at The Rally of the Rocks,” Kaplan concluded.

For more information, visit www.SSVWorks.com.

SSV Works Announces 2020 Kawasaki Teryx KRX1000 Kick Panel Speaker Pods

OXNARD, CA (05.11.2021) – SSV Works has launched the industry first 6.5-inch Kick Panel Speaker Pods (p/n KX-F65A) for the 2020+ Kawasaki Teryx KRX1000. The pods are now shipping (MSRP: $329.99) and include an SSV Works powersports A6 speaker.

“Utilizing 3D modeling and design, SSV Works was able to design a proper enclosure for a kick panel speaker, offering a better solution than the open backed factory door speakers.” explained Trevor Kaplan, SSV Works CEO. “Being completely open in the back, the factory door pods are not fully sealed, leaving them exposed to the elements and reducing sound quality. Our fully sealed, UV stable, all-weather durable kick panel pods provide better sound quality and ensure that you never have to worry about where you ride.”

The KX-F65A includes all necessary mounting hardware and an SSV Works 4ohm, 60/120W (RMS/Peak) powersports marine speaker with 25mm Titanium hard dome tweeter, Santoprene surround, UV Stable ASA plastic grille, and 2-pin posi-lock connectors.

The KX-F65 also has an unloaded option so that you can incorporate your own 6.5-inch speakers for a custom install.

For more information, visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.

SSV Works to Exhibit During 2021 Rally on the Rocks

OXNARD, CA (04.29.2021) – It’s been quite a year for all of us, and so many have taken to the outdoors in record numbers as an escape. So, once again, it only makes sense the market leader in off-road audio systems and accessories makes its presence known during one of the biggest events of the year.

SSV Works will be exhibiting at the 2021 Discount Tire Rally on the Rocks from May 12-15 in San Juan County, UT.

“Every year, we circle Rally on the Rocks as a top exhibiting event for us, and we can’t wait to get over to Utah for the 2021 event,” said Trevor Kaplan, SSV Works CEO. “SSV Works offers the industry’s only weatherproof Polaris RZR Pro XP full aftermarket audio solution, and the 2021 Rally on the Rocks is an ideal occasion to showcase our new and exciting audio kits to thousands of side-by-side enthusiasts.”

SSV Works is also participating as a sponsor for the Rally on the Rocks Taco Dinner Night this year.

“We feel we need to show our appreciation to the Powersports community for staying strong through the tough times we all have been experiencing,” Kaplan continued. “This is our way to give back to say ‘Thank you’ and offer some amazing audio prize packs for the nights’ raffle. It’s going to be a blast seeing all of our friends after so long!”

Last year SSV Works announced a collaboration with JVC in which SSV Works is now the exclusive Powersports distributor for the KD-MR1BTS marine/powersports digital media receiver.

“That success has led us to adding this incredible receiver to our XP1000 kits,” Kaplan concluded. “Our customers asked for an easy plug-and-play upgrade, we listened, and now they have it!”

For more information, visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.

SSV Works Adds JVC’s MR1 Receiver to Polaris Ranger XP1000 Kits

OXNARD, CA (02.18.2021) – SSV Works is making available JVC’s acclaimed MR1 digital media receiver in SSV Works’ 2-, 3-, and 5-speaker kits for Polaris Ranger XP1000 (model years 2018+). With included free back-up camera, if you already have a SSV Works Ranger system and want to upgrade, the dash kits (p/n RG4-R1) are also now available with an MSRP of $479.99.

“Last year, we announced a collaboration with JVC in which SSV Works is now the exclusive Powersports distributor for the KD-MR1BTS marine / powersports digital media receiver, and that success has led us to adding this incredible receiver to our XP1000 kits,” said Trevor Kaplan, SSV Works CEO. “Our customers asked for an easy plug-and-play upgrade, we listened, and now they have it!”

If you are currently running SSV Works’ MRB3 Bluetooth Media Receiver and are looking to upgrade, the new RG4-R1 kit is exactly what you need. Like most of SSV Works’ kits, RG4-R1 is a plug-&-play install, making it as simple as unplugging the current MRB3 unit, installing the new dash piece, and plugging in the new JVC unit. With the included harnessing, this Bluetooth Media Receiver plugs right into the current SSV system.

The KD-MR1BTS digital media receiver features Bluetooth, USB, a 2.7-inch color display, global tuner with weather band, 7-Band EQ, rear view camera capability, and is SiriusXM-Ready.

The KD-MR1BTS’ waterproof housing withstands jets of water from any direction thanks to IPX6 waterproof compliance. As a result, the receiver can be safely used not only in cars, but also in other types of motor vehicles including marine and motorsports use. A conformal coating safeguards electronic circuits from harsh environments that may contain moisture or chemical contaminants, providing a barrier to airborne contaminants from the operating environment, such as salt-spray, thus preventing corrosion.

“JVC is a legacy in the mobile audio radio market, and we could not be more excited to partner with such a brand and provide our Ranger XP1000 customers with the best powersports radio and overall audio solution kits in the market,” Kaplan concluded.

For more information, visit www.SSVWorks.com, call 818-991-1SSV (1778), or email sales@SSVworks.com.