SEMA Show

Big Installs and Bigger Announcements at KICKER’s 2022 SEMA Show Booth

Posted on by in Featured and tagged , .

STILLWATER, OK (10.26.22) – KICKER will feature a booth filled with custom vehicles and big announcements in its return following a three-year absence at the 2022 SEMA Show in Las Vegas. Located in the LV Convention Center’s North Hall in booth 10709, KICKER will launch its 50th anniversary celebration with several jaw-dropping vehicles and a bevy of new products.

The company that manufactures KICKER products, Stillwater Designs and Audio, was founded in 1973 by Steve Irby and a partner, and Irby continues today as the president and drive behind KICKER award-winning audio gear.  This year’s SEMA Show provides KICKER the opportunity to unveil new offerings like ST-Series Speakers and Bullet Tweeters, a PA line built to be as loud as possible while including KICKER’s dedication to sound quality. 

This long-awaited line of KICKER SPL (sound pressure level) products makes its debut on the SEMA Show floor, installed in a highly customized 2021 Ford Bronco that commemorates KICKER’s long-time relationship with SPL legend Team Gates and its record-setting Bronco from the early 2000s. The newer Bronco is loaded with four pair of seven-inch ST-Series midrange drivers, eight ST-Series bullet tweeters and nine SoloX L7X 12-inch subwoofers. KICKER will also unveil nine, 3,600-watt Warhorse™ amplifiers, installed in a custom amp rack.  ST-Series speakers are shipping and currently available; the other gear is expected to ship in 2023.

“KICKER is the originator of big bass,” said Drew Jones, owner of Bassahaulic Productions and designer of the Bronco’s 4th-order enclosure. “They’re going to be surprised at how good it will sound, and how long it will play. This is how systems should be installed and set up. With KICKER getting back into SPL competition, it will also help make the sport more approachable.”

A 1973 Chevy C10 created by Hills Hot Rods and JD Glassworks will also be featured in the booth, sporting a powerful yet compact sound system not found in the truck 50 years ago on the showroom floor. A KICKER KEY amplifier powers artfully integrated KS-Series Speakers, while a CX-Series amplifier provides signal to a single CompRT thin 10-inch sub, all hidden behind custom mesh grilles.

Owned by offroad legend Robby Gordon, SpeedUTV will add the limited-edition “El Jefe” UTV to the floor mix this year. This race-ready UTV is integrated with original equipment from KICKER – the new PX-Series five-channel powersports amplifier with a CompRT subwoofer and KM-Series all-weather speakers.

Expanding to its third brand in the booth, KICKER will also show its 100-watt MultiPro™ Tailgate System which can now be found as OE on the GMC Hummer EV. The Hummer joins the Sierra and the Canyon utilizing KICKER audio in its truck tailgates.

Full event details are available on the SEMA Show web page at www.semashow.com.

New Axxess Integration Accessories are Coming to SEMA 2022

Posted on by in Industry and tagged , .

HOLLY HILL, FL (10.25.22) – Axxess by Metra Electronics has expanded its product line to include additional vehicle applications for popular integration solutions and will showcase these new products at the SEMA show on November 1st-4th at the Las Vegas Convention Center. Now shipping are new vehicle-specific DSP packages, amp retention interfaces, STOP/START engine override interfaces, AXTC Series interfaces, line output converters, and DSP T-harnesses. These new integration accessories are designed to help installers deliver upgraded sound systems and everyday convenience to drivers, with less labor and work in the install bay. New products launching at SEMA include:

DSP Packages

Axxess’s new DSPL and DSPX packages fit select Chrysler, Lincoln, BMW, and GM vehicles, including industry-leading solutions designed for Ethernet amplifiers in BOSE sound systems. These products feature combined digital signal processor and Interface technologies that allow installers to upgrade their music experience and customize their sound system. The DSP reflashes the OE radio and gives full tuning control from the palm of your hand. It is designed to integrate with factory audio systems and offers easy sound system expansion. Axxess’ DSPL series provides six channels of output and a 15-band graphic EQ per channel, while the DSPX series features 10 channels of output and a 31-band graphic EQ per channel. Both products offer selectable crossover slopes. These products feature independent equalization for each output and the ability to read, write, and store configurations for future recall. All tuning is done wirelessly via a free downloadable app, available exclusively for Android devices using the Google Play store.       

Vehicle-Specific DSP T-Harnesses

Another exciting announcement from Axxess are new vehicle-specific DSP T-harnesses, designed to fit select BMW, Chrysler, Ford, GM, Honda, Mitsubishi, Nissan, Toyota, and more. These harnesses offer an “a la carte” option for installers where they can use them to fit their unique needs or pair them with Axxess’ DSPX or DSPL packages. These harnesses have easy plug-n-play installation and provide versatile, cost-effective solutions for installers allowing them to keep less inventory in stock.

Amp Retention Interfaces             

Axxess is debuting two new amp retention interfaces at SEMA; one designed to retain the Harmon Kardon amplifier in select European vehicles such as BMW and Porsche, and one designed to retain the BOSE amplifier in select GM vehicles. These add-on amplifier interfaces are used when replacing the factory radio, such as with Metra’s dash kits. These interfaces also retain the balance audio feature when replacing the factory radio and are Micro “B” USB updatable.

START/STOP Engine Override Interface

Axxess expands its AXSSO series with a new START/STOP engine override interface for select 2020-Up* Chrysler vehicles. This interface automatically disengages the STOP/START engine feature. The setting remains even after the key has been cycled, and the factory STOP/START button can resume the STOP/START feature once again. This exclusive and patented technology works with factory or aftermarket radios and is programmed through the Axxess Updater software program. This interface has weather-resistant housing and harnessing with plug-n-play installation under the hood.

AXTC Interfaces               

A new Interface has been added to Axxess’ Total Control Series, designed for use when replacing the radio in select Ford 2015-2018* vehicles. These products utilize patented Auto-Detect technology that automatically detects the vehicle type, radio connection, and preset controls, while allowing the ability to dual-assign steering wheel controls. It provides NAV outputs, accessory power, and a 12-volt illumination output, in addition to retaining R.A.P., and balance and fade. The Axxess Total Control Series is a universal solution designed to work with all major radio brands and both amplified and non-amplified audio systems. They can be manually programmed for most vehicles and will retain settings even after battery disconnection or interface removal.

Vehicle-Specific Line Output Converters

Axxess is introducing an assortment of new vehicle-specific line output converters designed to fit select BMW, Chrysler, Ford, GM, Honda, Hyundai, Nissan, Toyota, and more. These LOCs feature T-harnesses that install quickly and make it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. They are designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and they are 12v-500mA remote wire activated with signal sense.

These products will be showcased at the Las Vegas Convention Center at Metra’s 2022 SEMA Show booths, November 1st-4th. The main booth will be #11139 in the North Hall, and its off-roading and powersports products will be on display at booth #60031 in the West Hall. More product details will be available at AxxessInterfaces.com soon after the show.

 *Visit MetraOnline.com and axxessinterfaces.com for up-to-date vehicle-specific applications.

Race Sport Lighting Releases New Patented Hitch Bar Solution at SEMA Show

Posted on by in Featured and tagged , .

RINGWOOD, IL (10.25.22) – Race Sport Lighting will be releasing their brand new Patented and Made in USA Bolt-On Hitch Bar Light Solution for HD Series Ford, GMC, Chevy, and Dodge Trucks. SEMA Attendees will get the first look at this amazing lighting solution at booth #11416 in the Mobile Electronics section of the North Hall. Race Sport Lighting Staff will be available in the booth all week to answer any questions. There will be a standing display replicating how the product bolts on to OEM Hitch Receivers on the back of any HD Series truck.

This Hitch Bar Lighting System takes 1-2 hours for retailers to install in their bays and comes with all required wiring and bolt hardware in the kit. There is no drilling or modifications required to install this light system. There are no other lighting options on the market today that offer an OEM look while meeting the demands of Heavy-Duty Trucks. The lighting systems will be manufactured right in Northern Illinois and kept 100% American Made. You can view these products at racesportinc.com/hitch-bar-light-kits.html

“This product is going to be extremely profitable for our distributing and retail partners in 2023. Consumers are looking for unique and patented solutions like this one to add to their trucks and get the job done. This product will appeal to many different industries we serve beyond Truck Accessory market. We are already fitting up the Jeep Wrangler, Jeep Gladiator, and Ford Bronco just to name a few.” says Steven Jergensen, President of Race Sport Lighting.

The Race Sport Lighting booth in Las Vegas will also feature also feature an eye-catching display of their flagship Chasing Style LED Wheel Light Kits and the patented wireless solar cab light systems that have swept the nation in 2022. Race Sport Lighting has been a SEMA Manufacturing Member for 10+ years now and this will their 7th years exhibiting in the North Hall of the Las Vegas Convention Center. This is their first year back to the show since the global pandemic.

Visit racesportinc.com for more.

BOSS Audio Showcases New Wireless 7-Inch Double-DIN & Floating Head Units During 2022 SEMA Show

Posted on by in Industry and tagged , .

OXNARD, CA (10.25.22) – BOSS Audio Systems will showcase two new seven-inch, double-DIN, wireless, mech-less touchscreen multimedia players during the 2022 SEMA Show, held in Las Vegas, Nev. from Nov. 1-4 at the Las Vegas Convention Center, booth # N11429. The double-DIN BE920WCPA and BE920WCPA-FT (with backup camera) will start shipping early Q1 2023.  The Floating Head Units BECPA9W (9-Inch) and BECPA10W (10.1-Inch) will start shipping Q1 2023. 

“Our five new media players include Bluetooth-enabled Apple CarPlay & Android Auto compatibility, allowing users to stream wirelessly from their compatible Bluetooth device to the source unit so they can enjoy their favorite music or streaming music service such as Pandora or Spotify, wirelessly,” explained Colin Ross, BOSS Audio associate brand manager. “The Bluetooth connectivity also allows for additional hands-free safety options, including making and receiving phone calls.  Additionally, the wireless Floating Head Units feature a single-DIN chassis for vehicles that lack the dash space for a double-DIN installation.”

BE920WCPA and BE920WCPA-FT features include:

  • 80 Watts x 4 max power
  • RBDS Tuner, balance/fader/bass/treble and preset built-in EQ
  • Mech-less (no CD or DVD player)
  • Plays Bluetooth/USB, MP3, WMA, JPEG, FLAC, OGG, APE, FM/AM, digital media from smart phones
  • Compatible with audio out from smart phones and MP3 players
  • USB, Aux, steering wheel control input
  • Rear camera (BE920WCPA-FT only)
  • Front, rear & sub pre-amp outputs
  • USB charging, multi-color Illumination options

BECPA9W (9-Inch) and BECPA10W (10.1-Inch) features include:

  • Single-DIN installation with floating oversized touch screen
  • RBDS tuner, balance/fader and preset built-in EQ
  • 85 Watts x 4 max power
  • Mech-less (no CD or DVD player)
  • Plays Bluetooth/USB, MP3, WAV, AVI, FM/AM
  • Compatible with audio out from smart phones and MP3 players
  • USB, AV, front & rear camera input, steering wheel control input
  • Front, rear & sub pre-amp outputs
  • USB charging, multi-color illumination options
  • Bluetooth hands free; make and receive calls, Bluetooth audio streaming
  • Play and control music and apps such as Spotify/Pandora wirelessly

For more information, visit www.bossaudio.com.

New Axxess Integration Accessories are Coming to SEMA 2022

Posted on by in Industry and tagged , .

HOLLY HILL, FL (10.25.22) – Axxess by Metra Electronics has expanded its product line to include additional vehicle applications for popular integration solutions and will showcase these new products at the SEMA show on November 1st-4th at the Las Vegas Convention Center. Now shipping are new vehicle-specific DSP packages, amp retention interfaces, STOP/START engine override interfaces, AXTC Series interfaces, line output converters, and DSP T-harnesses. These new integration accessories are designed to help installers deliver upgraded sound systems and everyday convenience to drivers, with less labor and work in the install bay. New products launching at SEMA include:

DSP Packages

Axxess’s new DSPL and DSPX packages fit select Chrysler, Lincoln, BMW, and GM vehicles, including industry-leading solutions designed for Ethernet amplifiers in BOSE sound systems. These products feature combined digital signal processor and Interface technologies that allow installers to upgrade their music experience and customize their sound system. The DSP reflashes the OE radio and gives full tuning control from the palm of your hand. It is designed to integrate with factory audio systems and offers easy sound system expansion. Axxess’ DSPL series provides six channels of output and a 15-band graphic EQ per channel, while the DSPX series features 10 channels of output and a 31-band graphic EQ per channel. Both products offer selectable crossover slopes. These products feature independent equalization for each output and the ability to read, write, and store configurations for future recall. All tuning is done wirelessly via a free downloadable app, available exclusively for Android devices using the Google Play store.       

Vehicle-Specific DSP T-Harnesses

Another exciting announcement from Axxess are new vehicle-specific DSP T-harnesses, designed to fit select BMW, Chrysler, Ford, GM, Honda, Mitsubishi, Nissan, Toyota, and more. These harnesses offer an “a la carte” option for installers where they can use them to fit their unique needs or pair them with Axxess’ DSPX or DSPL packages. These harnesses have easy plug-n-play installation and provide versatile, cost-effective solutions for installers allowing them to keep less inventory in stock.

Amp Retention Interfaces             

Axxess is debuting two new amp retention interfaces at SEMA; one designed to retain the Harmon Kardon amplifier in select European vehicles such as BMW and Porsche, and one designed to retain the BOSE amplifier in select GM vehicles. These add-on amplifier interfaces are used when replacing the factory radio, such as with Metra’s dash kits. These interfaces also retain the balance audio feature when replacing the factory radio and are Micro “B” USB updatable.

START/STOP Engine Override Interface

Axxess expands its AXSSO series with a new START/STOP engine override interface for select 2020-Up* Chrysler vehicles. This interface automatically disengages the STOP/START engine feature. The setting remains even after the key has been cycled, and the factory STOP/START button can resume the STOP/START feature once again. This exclusive and patented technology works with factory or aftermarket radios and is programmed through the Axxess Updater software program. This interface has weather-resistant housing and harnessing with plug-n-play installation under the hood.

AXTC Interfaces               

A new Interface has been added to Axxess’ Total Control Series, designed for use when replacing the radio in select Ford 2015-2018* vehicles. These products utilize patented Auto-Detect technology that automatically detects the vehicle type, radio connection, and preset controls, while allowing the ability to dual-assign steering wheel controls. It provides NAV outputs, accessory power, and a 12-volt illumination output, in addition to retaining R.A.P., and balance and fade. The Axxess Total Control Series is a universal solution designed to work with all major radio brands and both amplified and non-amplified audio systems. They can be manually programmed for most vehicles and will retain settings even after battery disconnection or interface removal.

Vehicle-Specific Line Output Converters

Axxess is introducing an assortment of new vehicle-specific line output converters designed to fit select BMW, Chrysler, Ford, GM, Honda, Hyundai, Nissan, Toyota, and more. These LOCs feature T-harnesses that install quickly and make it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. They are designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and they are 12v-500mA remote wire activated with signal sense.

These products will be showcased at the Las Vegas Convention Center at Metra’s 2022 SEMA Show booths, November 1st-4th. The main booth will be #11139 in the North Hall, and its off-roading and powersports products will be on display at booth #60031 in the West Hall. More product details will be available at AxxessInterfaces.com soon after the show.

 *Visit MetraOnline.com and axxessinterfaces.com for up-to-date vehicle-specific applications.

Electric Vehicles Immersed Throughout 2022 SEMA Show

Posted on by in Featured and tagged .

DIAMOND BAR, CA (10.21.22) – As vehicle electrification increases, this year’s SEMA Show will include more features and activities to help Showgoers learn about the opportunities that the emerging technology offers the automotive aftermarket. In addition to SEMA Electrified – a 21,000-sq.-ft. area at the SEMA Show that is dedicated to solutions for electric vehicles (EV) platforms and conversions, the four-day annual B2B event will include EV-related seminars, programs, and activities throughout the Las Vegas Convention Center.

Representing a small percentage of all vehicles on the road, electric vehicles represent a fast-growing market with huge potential for the aftermarket.

The 2022 SEMA Show will feature electric vehicle (EV)-related seminars, programs, and activities, including SEMA Electrified, a 21,000-sq.-ft. area dedicated to solutions for EV platforms and conversions

Collectively, SEMA Electrified (North Hall, Booth 11268) will feature more than 35 vehicles and close to 60 different exhibits. On display will be OEM vehicles, conversion components, late-model EV accessories, charging solutions, EV safety and service equipment, and education and training stages. In addition to seminars and training taking place in SEMA Electrified, there are EV-related seminars offered through the official SEMA Show Education program. With more than 70 sessions, the SEMA Show Education program includes a dedicated EV track that will help Showgoers learn about the U.S. infrastructure needed to support widespread adoption of EVs, the intricacies of converting classic cars to electric power, and where the growth opportunities are for the aftermarket.

Since debuting at the 2019 SEMA Show, SEMA Electrified has served as a place for EV-related businesses to connect and collaborate. The section has grown significantly, going from 2,500-sq.-ft. in 2019, to 21,000-sq-ft. this year.

“Everything about EV in the aftermarket is growing: Participation, interest, advancements,” said Luis Morales, SEMA director of vehicle technology. “This year’s SEMA Show will have more EV-related products and activities than ever before.”

A new Electric Vehicle category in the New Products Showcase will make it easy for attendees to find new EV-related products. For the first time, the best products in the electric vehicle category will also be recognized with SEMA Best New Product Awards, presented Tuesday morning, Nov. 1, at the SEMA Show Kickoff Breakfast. Additionally, an automaker will be awarded the first-ever SEMA Award for Electric Vehicle of the Year on Monday, Oct. 31.

“The SEMA Show is where you’ll be able to see a wide collection of EV products for the aftermarket, learn about the technology, and network with pioneers who are shaping the electric vehicle market,” said Tom Gattuso, SEMA vice president of events. “If you’re in the EV aftermarket, or simply thinking about it, you’ll want to be at the SEMA Show.”

To learn more about the 2022 SEMA Show, including a list of exhibitors, seminars, and special events, visit www.semashow.com.

Metra Electronics Launches New Products for Ford Bronco at SEMA

Posted on by in Industry and tagged , .

HOLLY HILL, FL (10.21.22) – Metra Electronics is introducing new products designed to fit select Ford Broncos at the 2022 SEMA Show. The manufacturer has launched its collection of Bronco accessories by adding Lighting Brackets with features such as a corrosion-resistant black powder-coated finish and plastic covers that conceal the mounting hardware.

Metra will also showcase new aftermarket audio accessories such as a Dash-Mount Tweeter Plate, Speaker Harnesses, and a Kick Panel Speaker Adapter Plate. In addition, they will introduce patent-pending Rear Speaker Pods that allow installers to easily upgrade the 4″ factory rear pods to considerably larger 6.5” or 6.75” speakers. New products launching at SEMA will include:

Designed to Fit Ford Bronco 2021-Up*

  • Roof Lightbar Bracket for 50″- 52″ Heise LED lightbar
  • Roof Trac Bracket for Heise LED cube lights, driving lights, or a lightbar
  • Bumper Lightbar Bracket for 42″ Heise LED lightbar
  • Fog Light Bracket for installing Heise LED fog lights within the front bumper
  • Dash-Mount Tweeter Plate for installation of 2.5″ dash speakers
  • Speaker Harness for left and right dash (non-B&O), center (B&O), or rear pod speakers
  • Speaker Harness for front kick panel speakers
  • Kick Panel Speaker Adapter Plate for installation of 6.5″ to 6.75″ kick panel speakers
  • Rear Speaker Pods to upgrade the 4″ factory rear pods to 6.5” or 6.75” speakers

Fits 2012-2022 Fords, Including the New Bronco

  • Rearview Mirror T-Harness to easily connect a DVR, radar detector, security camera, aftermarket auto-dimming rearview mirror, or other devices

*Visit MetraOnline.com for up-to-date vehicle-specific applications.

These products will be showcased at the Las Vegas Convention Center at Metra’s 2022 SEMA Show booths, November 1st-4th. The main booth will be #11139 in the North Hall, and its off-roading and powersports products will be on display at booth #60031 in the West Hall. More product details will be available at MetraOnline.com soon after the show.

Builds Featuring DEI Products Will Be Found All Over SEMA

Posted on by in Industry and tagged , .

AVON LAKE, OH (10.20.22) – Design Engineering Inc.’s (DEI) SEMA booth (20213) this year will display a 1987 Buick Grand National. The car will be in a half-built phase in order that the DEI products it features will be easy for attendees to see. The shop doing the work is Dutchboys Hotrods out of Vicksburg, Mich.

The Grand National will have a 427 C.I Mast Motorsports built LS7 featuring a Nelson Racing Engines Mirror Image T4 Twin Turbo set up (72/68) and a number of other custom mods. Those include a number of DEI products built into the car’s interior: Boom Mat Vibration Damping Material; Titanium Gen3 Turbo Blanket; Onyx Gen3 Turbo Blanket; Boom Mat Tape; Under Carpet Lite; D-Mat; Black and Regular Titanium Exhaust Wrap; Stainless Steel Heat Pads; Black Floor and Tunnel Shield; Black Seaming Tape; Titanium and Black Glass Fiber Protect-a-Boots; Black & Regular Titanium Plug Wire Sleeving; Easy Loom Split Wire Sleeving; Fire Sleeve; Sensor Covers; Vapor Block Sleeving and more.

In addition to featuring a custom-build in its own booth, DEI products were also included in a number of other high-end custom builds, including some top-secret vehicles (from Greening Auto Company, KTL Restorations and Hill’s Hot Rods) that will not be unveiled until the show is underway. Here is a list of the vehicles featuring DEI products, their builders and the booths where attendees can find them:

Roadster Shop
1970 Chevelle – BASF Booth #20365
Boom Mat, Floor & Tunnel Shield II, Titanium Wrap, Vapor Block, Reflect-a-Gold
1987 Buick Grand National – Roadster Shop Booth #22889
Boom Mat, Floor & Tunnel Shield II, Titanium Wrap, Vapor Block, Reflect-a-Gold

Dutchboys Hotrods
1987 Buick Grand National – DEI Booth #20213

The Hot Rod Shop
2022 Ford Maverick – MTX Booth #10539
Boom Mat
1971 Ford F100 – Procharger Booth #22525
Boom Mat, Titanium Wrap

Goolsby Customs
Dodge A108 Van – BASF Booth #20365
Boom Mat, Under Carpet Lite, D-Mat, Black Floor and Tunnel Shield II, Titanium Exhaust Wrap
Ford Mustang – Griots Garage #50217
Boom Mat, Under Carpet Lite, D-Mat, Black Floor and Tunnel Shield II, Titanium Exhaust Wrap

Eddies Rod & Custom
1963 Corvette – BASF Booth #20365
Boom Mat, Under Carpet Lite, Floor and Tunnel Shield, Titanium Exhaust Wrap

KTL Restorations
1970 Mercury Cougar – Spanesi #32205
Boom Mat, Titanium Exhaust Wrap, Titanium Sleeving, Floor and Tunnel Shield II
1969 Camaro “Operation Talent” – BASF #V033-TBD, build not started yet

ATC Racing
Audi RS3 TCR – Toyo Tires Booth #24499
Boom Mat Original Finish Headliner Material

Zociety
Datsun 280Z – Speedhut Inc. Booth #20150
Boom Mat, Under Carpet Lite, Black Floor and Tunnel Shield II, Black Seaming Tape, Onyx Turbo Shield, Fire Sleeve, Titanium Exhaust Wrap, Black Protect-a-Boots

Koruworks
Nick Noback’s Formula Drift Spec BMW E46 M3 – Koenig Wheels Booth #44063
Floor and Tunnel Shield II, Heat Sheath, Heat Screen, Fire Sleeve, Cool Tape

Carbuff Network
1979 Jeep Wagoneer – TREMEC Booth #81290
Titanium Wrap, Boom Mat, Floor and Tunnel Shield II, Easy Loom

Revision Rods & Rides
1958 Ford F100 – Mothers Booth #81040
Boom Mat, Floor and Tunnel Shield II, Titanium Wrap

Visit designengineering.com for more.

Metra Brings New Dash Kits to SEMA 2022

Posted on by in Industry and tagged , .

HOLLY HILL, FL (10.18.22) – Metra Electronics is launching an assortment of new dash kits at the 2022 SEMA Show. These new products fit a wide range of vehicles, and expand on Metra’s TurboTactile, TurboTouch, and TouchTronix lines. Additionally, Metra has designed several new dash kits designed specifically for select Pioneer Modular Solutions receivers. Metra’s new products include vehicle-specific dash and stereo solutions designed to fit the following vehicles*:

  • Infinity G37 2008-2013
  • RAM 1500/2500/3500 & Chassis CAB 3500/4500/5500 2013-2018, Classic 1500 2019-2022
  • Dodge Durango 2014-2020
  • Ford Explorer 2011-2015, Edge 2011-2014, F-150 2015-2017, Mustang 2015-Up, Transit Connect 2021-Up,and Escape 2020-Up
  • Hyundai Elantra 2020-Up
  • KIA Sportage 2020-2021
  • Mazda Miata 1994-1997
  • Nissan Sentra 2000-2006
  • Toyota Camry 2021-Up and 4Runner 2010-Up
  • Honda Pilot 2016-2022, Ridgeline 2017-2022 and Passport 2019-2022

Visit MetraOnline.com for up-to-date vehicle specific information.

Metra’s TurboTactile kits feature easy-to-use rotary knobs with LCD status displays for temperature and fan speed. Additional factory-style hard buttons have laser-etched graphics to adjust the factory single-zone climate control systems. The buttons control features that are normally lost after removing the factory radio. Metra’s built-in patented interface technology retains climate control, safety, and steering wheel control features. The vehicle’s hazard button and passenger airbag indicator are also integrated into the kit. These kits are painted to match the factory finish and include installation parts for both Single-DIN and Double-DIN aftermarket radio installations.

TurboTouch kits feature built-in touchscreens paired with hard buttons and integrated electronics to retain most of the features normally lost when replacing the factory radio. The color touchscreen shows climate and personalization settings, adding a high-tech look and feel to the dashboard. The

backlit hard buttons can be customized with 250 different color options. These dash kits fit either a Single-DIN or Double-DIN radio and make stereo installation easier. Included wiring harnesses and interfaces ensure factory backup cameras will work on the new screens, and retain the use of steering wheel controls.

Metra’s TouchTronix kits are designed with a combination of Metra’s interfacing technology to retain the factory climate control features and sleek laser-etched hard buttons. The fan speed and mode are shown on a custom-fitted, painted, and laser etched plastic kit with PCB-driven LED lighting. An Axxess AXSWC is included to retain the factory steering wheel controls as well as the parts to retain the factory backup camera if equipped. These TouchTronix kits provide an upgraded look while maintaining the vehicle’s intended factory style.

Other new products include kits that combine elements from the TurboTactile and TurboTouch kits to create a hybrid product with the best of both worlds, and new options from Metra’s AXPIO line designed specifically for select Pioneer receivers. AXPIO solutions kits include an interface, vehicle-specific harnessing, a dash kit, and more. Vehicle information and settings controlled on the factory screen are retained, displayed, and controlled on the Pioneer touchscreen. The built-in integration technology from Axxess also retains safety chimes through an offboard speaker, retains audio controls on the steering wheel, retains R.A.P. (Retained Accessory Power), and provides accessory power (12-volt-10-amp) and NAV output for parking brake, reverse, and speed sense.

All of these new dash kits are available now and will be on display at Metra’s main SEMA Show booth #11139 in the North Hall of the Las Vegas Convention Center November 1st-4th, along with other new products.

Visit MetraOnline.com for more.

Nakamichi to Introduce Three New CarPlay Receivers and HD Back Up Camera at SEMA

Posted on by in Industry and tagged , .

MIAMI,FL (10.17.22) – Nakamichi will use the global stage of SEMA to launch three new wireless CarPlay / Android Auto receivers. Based off the same UI platform, these new 2023 models will also be compatible with the company’s new HD (Hi Def) back up camera.

Nakamichi is branding this the “Wireless Evolution” and the new receiver models employ the company’s new Susumo (advanced and improved) platform providing faster response and more intuitive menus for an improve user experience. Initially the lineup will include two double DIN 6.8-inch models available in a DVD and mechless version plus a mechless single DIN 10.1-inch floating screen receiver.

Incorporated in this new platform is the ability to integrate a 720p HD back-up camera offering enhanced detail in light and dark conditions. The NC-A100 comes with 20ft of video cable and a universal mounting bracket.

Pricing and availability will be announced during the SEMA Show.

Be sure to stop by SEMA booth #11517 (North Hall) so you can check out first hand Nakamichi’s “Wireless Evolution’” and get the details on the new Car Play receivers and HD back up camera.

Visit nakamichi-usa.com for more.