HOLLY HILL, FL (11.18.2020) – iBEAM Vehicle Safety Systems by Metra Electronics launched new aftermarket automotive safety products at SEMA360 that provide reliable OE-quality upgrades with easy to install options. Now shipping are two new ADAS products; a universal parking sensor system that requires no drilling, along with a two-way blind spot and lane change alert system that can be installed without removing the bumper. iBEAM is also now shipping a new wide-angle camera, a 1080p dash camera, and third brake light cargo cameras for Chevrolet/GMC and Ford trucks.

Two-Way Rear Blind Spot and Lane Change Alert System
iBEAM’s new rear two-way blind spot detection kit brings high-tech safety without the lengthy installation. The TE-BSM2 is mounted entirely inside the vehicle with one sensor mounted on the rear windshield, providing a clean and easy installation that eliminates the need for bumper removal. Unlike other systems, everything is built into a single sensor for an easy DIY installation, with no additional control modules or parts needed. This system provides both audible and visual alerts for rear blind spot detection within a 65.5ft field. An LED visual-only alert is shown if there is a vehicle in the blind spot and then the visual and audible alert is triggered if the blinker is on and a vehicle is in the blind spot, alerting the driver immediately.

No Drill Two-Sensor Parking System

Without drilling into the bumper, iBEAM’s new two-sensor parking solution, the TE-2PSK, provides enhanced accuracy and easy installation. Its reliable technology uses a higher frequency than current sensors on the market to allow for a more precise 3-foot sensing field with fewer false triggers. The TE-2PSK has everything built into the sensors with no additional control modules or parts needed, resulting in an easy to install kit that doesn’t require drilling into the bumper – simply mount the sensors and run wires. A three-zone setup for audible alerts helps drivers navigate difficult parking situations with ease. Designed for rear plastic bumpers.

Wide Angle Camera

iBEAM’s TE-190 is a 190-degree wide-angle camera that provides more visibility due to its larger field of view. This camera lens is adjustable, it is rated IP69, and has selectable parking lines. The resolution is 600 TV lines, it has a minimum illumination of 0.01 lux and can be mounted in the front, rear, or side of the vehicle.

1080p Dash Camera

The TE-DVR1080 is a new suction-cup mounted dash camera that is powered by a cigarette adapter, allowing for an easy to install solution. It has 1080p resolution at 30 fps and a 150-degree wide-angle lens. The 2-inch LCD screen shows menu options to allow the user to take video, photos, or playback media on the screen, with motion detection and parking mode features available. The G-sensor will lock video recordings if a crash is detected to avoid overwriting video footage in the event of an accident.

Third Brake Light Cargo Camera Frames

Two new third brake light cargo camera frames are now available from iBEAM. The TE-3BLCFD is designed for 2015-2020 Ford F-150, 2019-2020 Ford Ranger, and 2017-2020 Ford Superduty trucks. The TE-3BLCGM is designed for 2014-2020 Chevrolet Silverado and 2014-2020 GMC Sierra trucks. These frames add a blind spot/cargo camera to the third brake light of the vehicle with 480 TV lines resolution, selectable parking lines, and a 136-degree horizontal field of view. Both of these cameras are rated IP69 and improve rear visibility, allowing the driver to keep an eye on their cargo and rear blindspot areas.

All of these new products are now shipping with additional details available at iBEAMusa.com.

AVON LAKE, OH (11.18.2020) – Things can happen in an instant in the pits, meaning your pit crew can never be too safe. Keep their eyes, ears and arms protected with safety items from Design Engineering, Inc.

DEI’s Pit Crew Safety Kit includes vision, hearing and arm protection for professional mechanics, pit crew members and do-it-yourselfers. Kits include protective eyewear, ear plugs and Kevlar sleeving, all in one package and at an affordable price.

“Safety is the most important thing, which is why DEI is proud to offer professional-grade safety protection for mechanics, pit crew members and anyone working around vehicles,” says Mike Buca of DEI. “These items allow you to protect yourself at all times while working on any project.”

Kits include:
DEI Safety Glasses – The glasses are black-framed, impact-resistant, wraparound-style protective eyewear that meets ANSI Z87 general-purpose UV requirements. They provide 100% UV protection, are scratch-resistant and are available with clear, smoke or yellow lenses for flawless vision in any environment.

DEI Ear Plugs – The plugs feature triple flanges for a comfortable, one-size-fits-all design. They are re-useable and offer a Noise Reduction Rating (NPR) of 25 decibels, with a breakaway cord included.

DEI Kevlar Safety Sleeves – The sleeves provide superior resistance to cuts, slashes and heat in environments where workers’ arms are exposed. Strong without being bulky, they withstand temperatures up to 900º F, extend past the wrist and include a thumb hole for added protection of the palm area.

In addition to the complete Pit Crew Safety Kit, DEI Safety Glasses (#070513), Ear Plugs (#070530) and Kevlar Safety Sleeves (#070520) are available for individual purchase.
 
Visit www.designengineering.com for more.

LIBERTYVILLE, IL (11.17.2020) – “At Maxxsonics USA, we are deeply saddened to announce the sudden loss of a colleague and dear friend of the company, Lukas Louw. Lukas was a design consultant and one of the original engineers who worked with Hifonics founder Helmut Stieglitz. Lukas remained the Hifonics Chief Engineer until his passing. Our heartfelt condolences go out to Lukas’s family.”

On his passing, Alden Stiefel, President of Maxxsonics USA, commented, “Last week Maxxsonics lost a very integral part of its family. Lukas Lowe was not only our Chief Engineer he was a very dear friend of mine and he will be sorely missed. Lukas’s contribution to the mobile audio industry will go unmatched.”

Visit maxxsonics.com for more.

FULLERTON, CA (11.17.2020) – Vision Tech America, Inc. has launched VTR419GW, a dual, front, 4K UHD, and rear, 2K FHD camera dash cam with a full touch screen.  It is the most advanced and user friendly with safety in mind.

VTR419GW, with a high-definition front camera, will record vibrant color pictures during the day,  and with the rear wide dynamic range camera, will be able to read the license plate number of a  vehicle following with headlights during the night driving. With a wide viewing angle, a rear camera with a reverse trigger wire can be used as a backup camera.

Out of box, full features also include
• High definition 4K UHD front camera and 2K FHD WDR camera with a backup trigger line,
• Gesture sensitive, 3.0” full touch screen
• motion detection, impact sensitive parking mode and continuous loop recording,
• GPS for Speed and Geotagging for playback,
• Wi-Fi connectivity for a mobile app for viewing and playback,
• USB Video Class (UVC) connectivity for direct memory access, USB camera, and Charging, and
• H.264 and H.265 recoding for maximum compression with minimum clarity loss for efficient storage usage.

In this regard, “Our new VTR419GW incorporates the latest technology to provide the best safety and security that a driver can expect. It will provide a driver with excellent supporting evidence for defending himself or herself in case of a car accident. It will help anyone to drive and park safely with confidence. We are very excited to offer VTR419GW to all drivers whether they are new drivers, commuters, or professional drivers.” said Richard Hong, VP Sales.

For more information, visit www.visiontechamerica.com/VTR419GW

 (11.13.2020) – ZZ-2 has released the IT-INF-Q-W for select Infiniti vehicles.

Rich DeSclafani stated “These interfaces provide a complete all in one solution for supported vehicles. They offer wireless connectivity, safety, and convenience. They are exactly what is needed to add the latest technology to these Infiniti vehicles. The interfaces use the factory touchscreen or jog wheel come with a 3 year warranty.”

FEATURES:

• Wireless CarPlay
• Android Auto
• Backup Camera Input (w/Dynamic Moving Lines)
• Front Camera Input (w/ Parking Mode)
• Smartphone Mirroring/Mirror Link
• USB A/V Playback
• Touchscreen Control

COMPATIBILITY:
2014 and UP – Q50/Q50L
2016 and UP – Q60
2018 and UP – QX50

Visit www.zz-2.com for more.

HOLLY HILL, FL (11.13.2020) – Heise LED Lighting Systems by Metra Electronics, a leading manufacturer of aftermarket automotive lighting, is now shipping a flush mount case for its existing 8 Gang Switch Panel System (HE-SWP8), introduced last week at SEMA360.

Heise first introduced the compact 8 Gang Switch Panel System, the HE-SWP8, at the 2019 SEMA Show. This product features a rugged design that works in all types of vehicles, including UTVs, Jeeps, and other outdoor applications. The HE-SWP8 can integrate lighting control into any vehicle and fit into the dash panel, center console, vehicle pillar or even the overhead sunglass holder.

This gang switch panel system controls up to 8 different auxiliary LED lights or electrical devices and has 50 different switch stickers included for customization. Blue LED backlighting illuminates the switches and it can handle all types of 12V DC accessories. The compact control panel measures 2.6 by 4.6 inches while the under-hood mounted control box has a 4.2 by 7.5 inch footprint.

Now, a flush mount case with a snap-on trim plate, the HE-SWP8C, is available to make installation clean and even easier. The switch panel screws securely to the case box and the cut template and hardware are included for added convenience.

A detailed video showing installation tips can be watched below:

Visit HeiseLED.com for more.

ARLINGTON, VA (11.12.2020) – The Consumer Technology Association (CTA) has partnered with strategic advisory firm MediaLink, an Ascential company, to curate the official content for the C Space experience at the first-ever, all-digital CES 2021 – the world’s most influential technology event, happening Jan. 11-14. The partnership between CTA and MediaLink builds on a history of collaboration in making C Space the destination for leaders in the media, marketing and entertainment industries. C Space audiences discover disruptive tech trends that are changing advertising mediums, marketing and consumer behavior. The news follows CTA’s announcement to select Microsoft as its technology partner for the show.

CTA and MediaLink will collaborate on curating a thought leadership agenda that will bring together the entire marketing and entertainment communities to discuss thought-provoking issues and explore what’s new and what’s next within the C Space’s digital experience. C Space will feature two days of content that will show how the latest technologies impact marketers and creators. Audiences will be able to connect and network and enjoy special entertainment events. The annual C Space Keynote and Storyteller sessions will also return.

“The C Space Experience at CES has changed the game for marketers who want to stay ahead of the curve on how their business will be impacted by the latest technology innovation and its ripple effect on human behaviors,” said Karen Chupka, executive vice president of CES. “For more than a decade, MediaLink has been instrumental in helping us engage marketers, media and entertainment leaders. We look forward to working with them to create an exciting C Space experience at CES 2021.”

“There’s a theory that constraints can bring about some of the brightest moments of innovation,” said Michael E. Kassan, Chairman and CEO, MediaLink. “The pandemic brought us plenty of new constraints – what better opportunity for us to push the limits of what technology can really do. We’re excited to continue our long-term partnership with CTA at this pivotal moment. At the all-digital C Space, marketers will be able to experience, learn and discover firsthand how technology can help them dream bigger, and build deep consumer relationships to deliver business results both now and in the years to come.”

CES 2021 will take place January 11-14:

January 11: Exclusive media-only access.
January 12-13: Exhibitor showcase and conference programming.
January 14: Conference programming.
Registration will open on December 1, 2020.

Click here for more info about the all-digital CES 2021.