Axxess

New Axxess Line Output Converters and Accessories Debut at SEMA

Posted on by in Industry and tagged .

HOLLY HILL, FL (10.23.23) – Axxess by Metra Electronics is unveiling new high-voltage active line output converters (LOCs), an active LOC with bass enhancement processor, active LOCs with bass restoration, load resistors, vehicle-specific active LOC T-harnesses, and active noise canceling (ANC) bypass harnesses products at the 2023 SEMA Show. These products are designed to give car audio enthusiasts reliability and convenience when designing and powering their audio systems and will be displayed from October 31 to November 3 at the Las Vegas Convention Center. Metra’s main booth will be #10539 in the North Hall of the LVCC, and its off-roading and powersports products will be displayed at booth #60031 in the West Hall.

High-Voltage Active Line Output Converters (LOCs)

These new LOCs have universal applications and enable installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This product line features incredible input power capabilities, a load selector, a clip indicator, enhanced output controls, and noise isolation countermeasures. Axxess will also offer an add-on product, the AX-RM1, that plugs into their Pro Series and LD Series LOC products to provide an additional subwoofer level adjustment via an external bass knob. The AX-LOC product line will include a variety of options to fit installers’ unique needs.

6-Channel Premium Active Summing LOC

The AX-LOC6.6-PRO is a 6-channel Active Summing LOC from the Axxess Pro Series that provides seamless integration by summing OEM audio signals, delivering a full-range output that captures every detail and nuance of audio tracks. Various frequency input signals are taken from an OEM amplifier or OEM source unit and output as a full-range summed signal required for aftermarket equipment. The result is enhanced clarity, depth, and balance so that music can be enjoyed like never before. A compact remote control is included featuring a knob for adjusting the primary volume of each of the six channels, and a second knob for controlling the bass level of channels five and six.

Active LOC with Bass Enhancement Processor

This active LOC with a bass enhancement processor has cutting-edge features to enhance the

sound of audio systems, capturing the full range of deep tones within music. This device seamlessly integrates into a vehicle’s factory audio system, preserving the original aesthetics. It scans incoming audio signals from the radio to replace low-frequency information that is lost in compressed music, such as missing bass tones. It then increases bass response accordingly with a built-in line driver. Adaptive activation modes let users choose between a traditional 12-volt remote trigger, the simplicity of DC offset, or audio sense activation for ultimate customization.

This LOC features a programmable subsonic harmonizer that filters out subsonic noise, protecting speakers while enhancing overall clarity. High-voltage output settings unleash the full potential of an audio system, providing an impressive 10-volt output voltage. Installers control their audio experience using the included remote that adjusts bass enhancement levels and output volumes with the touch of a button. Users can precisely tailor their audio experience using built-in load resistor settings, seamlessly matching the requirements of OE equipment. Whether installed with a high-end OE system or a standard radio and amplifier, this technology allows users to align the characteristics for optimal sound reproduction.

Active LOCs with Bass Restoration:

Axxess’s AX-BXLOC2 and AX-BXLOC2-PRO are compact 2-channel line output converters with active input circuitry, allowing them to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. They convert them to high-quality pre-amp signals that can then be directed to aftermarket amplifiers. The AX-BXLOC2 prevents factory audio systems from regulating lower frequencies and reducing the output of bass frequencies as the volume increases. A Bass-X restoration circuit in the LOC allows users to enjoy their music as it was recorded while maintaining the use of factory volume and steering wheel controls. The AX-BXLOC2-PRO includes these features, plus a ground isolation switch, multiple turn-on modes, and built-in load resistors for use with factory radios or amplifiers that mute the audio signal when factory speakers are disconnected.

Load Resistors

Axxess’s load resistors solve common problems for installers adding aftermarket equipment while providing the best possible audio signal. For example, factory audio systems in modern vehicles are designed to mute the radio and/or amplifier output should a speaker fail or get disconnected. Axxess load resistors prevent this so that installers can add aftermarket equipment. These products use specific values to allow for the best possible audio signal and safely stabilize the output of a factory audio system. The AX-LR product line is available in 20-ohm, 39-ohm, or 60-ohm options to fit a variety of vehicles, such as select late-model Dodge, Chrysler, Jeep, RAM, and Fiat models.

Vehicle-Specific Active LOC T-Harnesses

Axxess will display new active LOC T-harnesses that make it easy to add a subwoofer or a complete audio system to a variety of vehicle applications. These harnesses are designed to work with the Axxess active line output converters and are versatile enough to be compatible with most sound processors, line output converters, and amplifiers with high-level inputs. They provide convenient access to the speaker-level output signals from a factory radio, making installation easier. They provide signal connections for an audio system, including constant 12-volt (10-amp fuse), ground, and remote turn-on leads, and simplify the connection process for devices like active signal processors. These T-harnesses are easily installed by disconnecting the factory radio and connecting the two T-harness plugs. One plug connects to the radio, while the other snaps into the previously removed plug. This setup allows the radio to remain fully connected to the vehicle while providing additional wires for adding an amplifier.

These T-harnesses are equipped with mating 8-pin plugs that remain connected when installers add a subwoofer amplifier, ensuring that the factory speakers continue to receive power from the radio. On the radio side of the T-harness, there is a pre-wired speaker-level output audio signal for a dedicated subwoofer amplifier or powered subwoofer, making the installation process highly versatile and compatible with various setups. To power an aftermarket system, the wiring can be adjusted by utilizing the 8-pin connectors and harnesses for the integration of a 4-channel amplifier. These Axxess T-harnesses include the materials needed for routing the outputs of an aftermarket amplifier back through the factory wiring to reach the speakers.

Vehicle-Specific ANC Bypass Harnesses

Axxess will introduce new active noise canceling bypass harnesses designed to ensure smooth speaker and subwoofer upgrades for various vehicles with ANC audio systems at SEMA. These new harnesses maintain proper communication between audio equipment and the ANC system, giving listeners complete control over their music without sound distortion, interference, or conflict between devices. They prevent the built-in microphones within ANC systems from creating compatibility issues by mistaking aftermarket speakers and subwoofer vibrations for interference. Axxess’s ANC bypass harnesses also prevent Audio system upgrades from affecting a vehicle’s sensitive electronics and causing system errors.

More product details will be available at AxxessInterfaces.com soon after the show.

Axxess to Simplify Product Line SKUs Ahead of SEMA 2023

Posted on by in Industry and tagged , .

HOLLY HILL, FL (10.17.23) – Axxess by Metra Electronics has announced that the brand has begun simplifying and restructuring its vehicle-specific interface product line, focusing on condensing the number of SKUs on the market. This process will ultimately benefit dealers and installers of Axxess products, making it easier to quickly locate the correct integration solution for the job at hand. This initiative will begin ahead of the SEMA show, where the brand will display its new, revamped interface products from October 31 to November 4 at the Las Vegas Convention Center.

“The primary goal is to incorporate more vehicle applications into a smaller number of individual products so dealers can more easily locate what they need and keep less stock on-site,” says Jason Anderson, Metra’s Vice President of Research and Development. He adds, “I feel that after this transition, more integrators will prefer Axxess because of how easy it will be to find what they need for each vehicle.” Another significant part of this plan will be an overhaul of Axxess’s Vehicle Fit Guide, which is the primary tool available to installers to search the brand’s product line for the appropriate interface to fit their audio installation needs.

The team at Axxess will upgrade its system to allow customers to find the interface they need quickly by asking themselves three key questions. For example, a GM vehicle would prompt dealers to respond to the following:

  1. Do you want to retain OnStar?
  2. Do you need to retain an OE amplifier?
  3. Do you want to retain steering wheel controls?

These questions will clarify what they wish to retain while upgrading a vehicle’s sound system and match the appropriate interface product accordingly. It is notable that Axxess will achieve this system redesign without changing part numbers, with the exception of a few products, and will maintain full coverage of all vehicle applications in its current lineup.Axxess continues to produce industry-leading vehicle-specific DSP packages and T-harnesses, amp retention interfaces, STOP/START engine override interfaces, AXTC Series interfaces, a newly released series of line output converters, and other integration accessories designed to help installers deliver upgraded sound systems and everyday convenience to drivers, with less labor and work in the install bay.

Their products will be showcased at the Las Vegas Convention Center at Metra’s 2023 SEMA Show booth, #10539, in the North Hall. More product details will be available at AxxessInterfaces.com soon

New Axxess Integration Accessories are Coming to SEMA 2022

Posted on by in Industry and tagged , .

HOLLY HILL, FL (10.25.22) – Axxess by Metra Electronics has expanded its product line to include additional vehicle applications for popular integration solutions and will showcase these new products at the SEMA show on November 1st-4th at the Las Vegas Convention Center. Now shipping are new vehicle-specific DSP packages, amp retention interfaces, STOP/START engine override interfaces, AXTC Series interfaces, line output converters, and DSP T-harnesses. These new integration accessories are designed to help installers deliver upgraded sound systems and everyday convenience to drivers, with less labor and work in the install bay. New products launching at SEMA include:

DSP Packages

Axxess’s new DSPL and DSPX packages fit select Chrysler, Lincoln, BMW, and GM vehicles, including industry-leading solutions designed for Ethernet amplifiers in BOSE sound systems. These products feature combined digital signal processor and Interface technologies that allow installers to upgrade their music experience and customize their sound system. The DSP reflashes the OE radio and gives full tuning control from the palm of your hand. It is designed to integrate with factory audio systems and offers easy sound system expansion. Axxess’ DSPL series provides six channels of output and a 15-band graphic EQ per channel, while the DSPX series features 10 channels of output and a 31-band graphic EQ per channel. Both products offer selectable crossover slopes. These products feature independent equalization for each output and the ability to read, write, and store configurations for future recall. All tuning is done wirelessly via a free downloadable app, available exclusively for Android devices using the Google Play store.       

Vehicle-Specific DSP T-Harnesses

Another exciting announcement from Axxess are new vehicle-specific DSP T-harnesses, designed to fit select BMW, Chrysler, Ford, GM, Honda, Mitsubishi, Nissan, Toyota, and more. These harnesses offer an “a la carte” option for installers where they can use them to fit their unique needs or pair them with Axxess’ DSPX or DSPL packages. These harnesses have easy plug-n-play installation and provide versatile, cost-effective solutions for installers allowing them to keep less inventory in stock.

Amp Retention Interfaces             

Axxess is debuting two new amp retention interfaces at SEMA; one designed to retain the Harmon Kardon amplifier in select European vehicles such as BMW and Porsche, and one designed to retain the BOSE amplifier in select GM vehicles. These add-on amplifier interfaces are used when replacing the factory radio, such as with Metra’s dash kits. These interfaces also retain the balance audio feature when replacing the factory radio and are Micro “B” USB updatable.

START/STOP Engine Override Interface

Axxess expands its AXSSO series with a new START/STOP engine override interface for select 2020-Up* Chrysler vehicles. This interface automatically disengages the STOP/START engine feature. The setting remains even after the key has been cycled, and the factory STOP/START button can resume the STOP/START feature once again. This exclusive and patented technology works with factory or aftermarket radios and is programmed through the Axxess Updater software program. This interface has weather-resistant housing and harnessing with plug-n-play installation under the hood.

AXTC Interfaces               

A new Interface has been added to Axxess’ Total Control Series, designed for use when replacing the radio in select Ford 2015-2018* vehicles. These products utilize patented Auto-Detect technology that automatically detects the vehicle type, radio connection, and preset controls, while allowing the ability to dual-assign steering wheel controls. It provides NAV outputs, accessory power, and a 12-volt illumination output, in addition to retaining R.A.P., and balance and fade. The Axxess Total Control Series is a universal solution designed to work with all major radio brands and both amplified and non-amplified audio systems. They can be manually programmed for most vehicles and will retain settings even after battery disconnection or interface removal.

Vehicle-Specific Line Output Converters

Axxess is introducing an assortment of new vehicle-specific line output converters designed to fit select BMW, Chrysler, Ford, GM, Honda, Hyundai, Nissan, Toyota, and more. These LOCs feature T-harnesses that install quickly and make it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. They are designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and they are 12v-500mA remote wire activated with signal sense.

These products will be showcased at the Las Vegas Convention Center at Metra’s 2022 SEMA Show booths, November 1st-4th. The main booth will be #11139 in the North Hall, and its off-roading and powersports products will be on display at booth #60031 in the West Hall. More product details will be available at AxxessInterfaces.com soon after the show.

 *Visit MetraOnline.com and axxessinterfaces.com for up-to-date vehicle-specific applications.

New Axxess Integration Accessories are Coming to SEMA 2022

Posted on by in Industry and tagged , .

HOLLY HILL, FL (10.25.22) – Axxess by Metra Electronics has expanded its product line to include additional vehicle applications for popular integration solutions and will showcase these new products at the SEMA show on November 1st-4th at the Las Vegas Convention Center. Now shipping are new vehicle-specific DSP packages, amp retention interfaces, STOP/START engine override interfaces, AXTC Series interfaces, line output converters, and DSP T-harnesses. These new integration accessories are designed to help installers deliver upgraded sound systems and everyday convenience to drivers, with less labor and work in the install bay. New products launching at SEMA include:

DSP Packages

Axxess’s new DSPL and DSPX packages fit select Chrysler, Lincoln, BMW, and GM vehicles, including industry-leading solutions designed for Ethernet amplifiers in BOSE sound systems. These products feature combined digital signal processor and Interface technologies that allow installers to upgrade their music experience and customize their sound system. The DSP reflashes the OE radio and gives full tuning control from the palm of your hand. It is designed to integrate with factory audio systems and offers easy sound system expansion. Axxess’ DSPL series provides six channels of output and a 15-band graphic EQ per channel, while the DSPX series features 10 channels of output and a 31-band graphic EQ per channel. Both products offer selectable crossover slopes. These products feature independent equalization for each output and the ability to read, write, and store configurations for future recall. All tuning is done wirelessly via a free downloadable app, available exclusively for Android devices using the Google Play store.       

Vehicle-Specific DSP T-Harnesses

Another exciting announcement from Axxess are new vehicle-specific DSP T-harnesses, designed to fit select BMW, Chrysler, Ford, GM, Honda, Mitsubishi, Nissan, Toyota, and more. These harnesses offer an “a la carte” option for installers where they can use them to fit their unique needs or pair them with Axxess’ DSPX or DSPL packages. These harnesses have easy plug-n-play installation and provide versatile, cost-effective solutions for installers allowing them to keep less inventory in stock.

Amp Retention Interfaces             

Axxess is debuting two new amp retention interfaces at SEMA; one designed to retain the Harmon Kardon amplifier in select European vehicles such as BMW and Porsche, and one designed to retain the BOSE amplifier in select GM vehicles. These add-on amplifier interfaces are used when replacing the factory radio, such as with Metra’s dash kits. These interfaces also retain the balance audio feature when replacing the factory radio and are Micro “B” USB updatable.

START/STOP Engine Override Interface

Axxess expands its AXSSO series with a new START/STOP engine override interface for select 2020-Up* Chrysler vehicles. This interface automatically disengages the STOP/START engine feature. The setting remains even after the key has been cycled, and the factory STOP/START button can resume the STOP/START feature once again. This exclusive and patented technology works with factory or aftermarket radios and is programmed through the Axxess Updater software program. This interface has weather-resistant housing and harnessing with plug-n-play installation under the hood.

AXTC Interfaces               

A new Interface has been added to Axxess’ Total Control Series, designed for use when replacing the radio in select Ford 2015-2018* vehicles. These products utilize patented Auto-Detect technology that automatically detects the vehicle type, radio connection, and preset controls, while allowing the ability to dual-assign steering wheel controls. It provides NAV outputs, accessory power, and a 12-volt illumination output, in addition to retaining R.A.P., and balance and fade. The Axxess Total Control Series is a universal solution designed to work with all major radio brands and both amplified and non-amplified audio systems. They can be manually programmed for most vehicles and will retain settings even after battery disconnection or interface removal.

Vehicle-Specific Line Output Converters

Axxess is introducing an assortment of new vehicle-specific line output converters designed to fit select BMW, Chrysler, Ford, GM, Honda, Hyundai, Nissan, Toyota, and more. These LOCs feature T-harnesses that install quickly and make it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. They are designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and they are 12v-500mA remote wire activated with signal sense.

These products will be showcased at the Las Vegas Convention Center at Metra’s 2022 SEMA Show booths, November 1st-4th. The main booth will be #11139 in the North Hall, and its off-roading and powersports products will be on display at booth #60031 in the West Hall. More product details will be available at AxxessInterfaces.com soon after the show.

 *Visit MetraOnline.com and axxessinterfaces.com for up-to-date vehicle-specific applications.

Axxess Ships New Interface Designed to Retain Ford F-150 and Fusion A2B Amplifiers

Posted on by in Industry and tagged .

HOLLY HILL, FL (07.30.2021) – Axxess by Metra Electronics has a new interface, the AXA2B-FD1, designed to retain the A2B amplifier in Ford’s 2018-up* F-150 and 2017-up* Fusion models. This add-on amplifier interface is used when replacing the factory radio with Metra’s 99-5834CH and 99-5841B TurboTouch dash kits, which are sold separately.

This solution retains the Bang & Olufsen amplifier with an A2B input in Ford’s F-150 and retains the Sony amplifier with an A2B input in Ford Fusion. This Axxess interface also retains the balance audio feature when replacing the factory radio and is Micro “B” USB updatable.

AXA2B-FD1 Product Specifications:

  • Add-on interface for Metra’s 99-5834CH & 99-5841B dash kits
  • Allows the amplifier to keep working when replacing the original factory radio
  • Retains the Bang and Olufsen amplifier with an A2B input in Ford F-150
  • Retains the Sony amplifier with an A2B input in Ford Fusion
  • Retains balance
  • Includes a vehicle-specific harness
  • Micro “B” USB updatable

Visit AxxessInterfaces.com and MetraOnline.com for more.

Axxess Shipping New DSP Packages and Integration Solutions

Posted on by in Industry and tagged .

HOLLY HILL, FL (06.04.2021) – Axxess by Metra Electronics is now shipping two new plug-n-play packages for its AXDSP-X, five new packages for its AXDSP-L “Lite” models, and a universal water-resistant AXDSP-L. Additional new integration products include a personalization retention interface designed to fit select Mazda CX-5 and CX-9 models and an LVDS camera interface designed to fit select Chevrolet and GMC models.

Plug-N-Play AXDSP-X Packages

Axxess’s patented 10-channel digital signal processor (AXDSP-X) and a vehicle-specific wiring harness are included in these new packages, designed for convenient plug-n-play installation. The patented AXDSP-X features 6 inputs, 10 individually assignable outputs with a 31-band graphic EQ on each channel and high, low, and bandpass filters. Also included is a bass knob for level control of the subwoofer amplifier. The following new packages are now shipping:

  •       AXDSPX-VW1: Fits Volkswagen 2011-2014 (non-amplified models)
  •       AXDSPX-TY1: Fits Toyota 2010-up*

Plug-N-Play AXDSP-L Packages

Axxess’s patented 6-channel DSP “Lite” (AXDSP-L), a vehicle-specific harness, and a bass knob are included in these new plug-n-play packages. The AXDSP-L features 4 inputs, 6 individually assignable outputs with a 15-band graphic EQ, and independent equalization for front, rear and subwoofer channels. The following new packages are now shipping:

(excluding models equipped with a Fender Premium Audio system)

Universal Water-Resistant AXDSP-L

Just in time for summer, Axxess is now shipping a universal DSP “Lite” (AXDSPL-WR) with a water-resistant enclosure and zip tie mounts. This solution is ideal for motorcycles, powersports vehicles, boats, and other outdoor vehicles that could expose the DSP to water or moisture. This DSP can be used with OE or aftermarket radios and, like all of the Axxess DSP models, has an internal header port for adding a wireless streaming interface module (AXDSPL-BT) if the vehicle does not have a receiver/head unit. 

Personalization Interface for Mazda

Axxess has a new interface that will retain most of the vehicle personalization settings that would otherwise be lost when replacing the factory radio in select Mazda CX-5 and CX-9 models. The AXBT-MZ2 utilizes short-range wireless technology to allow the driver to adjust and control settings from a smartphone app that were previously controlled from the factory screen. Actual personalization options available vary per vehicle and trim level, and installers should refer to the owner’s manual for options available. This is a completely plug-n-play solution with no wiring required. This interface works with app compatible smartphones or tablets and is designed to fit the following Mazda models:

  •       CX-5 2013-2015 (with full-color LCD screen)
  •       CX-9 2007-2012 (with full-color LCD screen)
  •       CX-9 2013-2015 (with full-color LCD screen)
  •       CX-9 2007-2012 (with full-color LCD screen and NAV)


LVDS Camera Interface for GM
Adding multiple cameras to the factory screen is no longer an issue for 2014-2019 Chevrolet and GMC trucks and SUVs. The AXAC-GM1 is an LVDS camera switching interface that is intended for use on 8-inch factory screens to enable a single camera input or add up to four cameras. This interface can be programmed to automatically activate the camera inputs based on turn signal or reverse triggers. The Rear Video Assistant (RVA) option can be used to keep a camera active during the duration of a trip, allowing the driver to monitor a trailer hitch, baby in the backseat, or rear cargo. The reverse signal and turn signal triggers are generated through the vehicle’s CAN Bus communication and this interface is Micro “B” USB updatable. The AXAC-GM1 is designed for the following GM vehicles with 8-inch screens:

Fits Chevrolet:

  •       Colorado 2015-2019
  •       Silverado 2014-2019
  •       Silverado 2500/3500 2019
  •       Suburban 2015-2019
  •       Tahoe 2015-2019

Fits GMC:

  •       Canyon 2015-2018
  •       Sierra 2014-2018
  •       Sierra Limited 2019
  •       Yukon/XL 2015-2019

These solutions are all in stock and shipping now and will be covered in Metra’s manufacturer training session at KnowledgeFest in Orlando.

*See the vehicle application guide at AxxessInterfaces.com for up-to-date, vehicle specific information.

Axxess Now Shipping New Plug-N-Play DSP Solutions for Multiple Brands

Posted on by in Industry and tagged , .

HOLLY HILL, FL (09.03.2020) – Axxess by Metra Electronics is now shipping new AXDSP-X packages designed for Chrysler, Ford, GM, Hyundai/Kia and a new water-resistant solution for Harley-Davidson. These DSP kits include Axxess’s 10-channel digital signal processor and a vehicle-specific wiring harness for convenient plug-n-play installation.

The patented AXDSP-X features 6 inputs, 10 individually assignable outputs with a 31-band graphic EQ on each channel and high, low, and bandpass filters. Also included in these packages is a bass knob for level control of the subwoofer amplifier and if needed, a data interface for seamless integration with the OEM vehicle technology. The following new packages are now shipping:

AXDSPX-HD1

Saddle Tramp DSP Package for Harley-Davidson:

A new water-resistant package, the AXDSPX-HD1, is now available for select 1998-2013 Harley-Davidson motorcycles, with or without an amplified sound system. The amplifier, if equipped, does not need to be retained. This package has a water-resistant case for the AXDSP-X with zip tie mounts and includes a vehicle-specific T-harness with a rubber boot that snaps into the housing, designed for outdoor use. All wiring for this product will be done at the radio location and it is Micro “B” USB updatable. This Axxess package is in stock and available now under Metra’s Saddle Tramp motorcycle accessories product line.

Axxess has recently updated all of their part numbers; the AX-DSP-X is now the AXDSP-X, with kits and harnesses following these same part number updates. Additional product information is available at AxxessInterfaces.com and installers can look for live webinars from the Metra YouTube channel to learn more about these products.

New Axxess Total Control SWC Retention and Data Interfaces for GM and BMW Now Shipping

Posted on by in Industry and tagged .

HOLLY HILL, FL (07.17.2020) – Axxess by Metra Electronics is now shipping new integration products for a wide range of GM and BMW vehicles. Adding to the Axxess Total Control Interface Series (AXTC) are eight new solutions for radio replacement integration, which include vehicle-specific harnessing and the AXTC data interface. When replacing a radio, the interface utilizes patented Auto-Detect technology1 that automatically detects the vehicle type, radio connection and preset controls, while allowing the ability to dual assign steering wheel controls. The AXTC interface also provides additional patent-pending features to give installers a single solution that offers total control. It also provides NAV outputs, accessory power and a 12-volt illumination output, in addition to retaining R.A.P. (retained accessory power). Additional features vary by vehicle application and may include chime retention, retaining balance and fade, and more.

The Total Control Interface Series is designed to work with all major radio brands. In addition to Auto-Detect, it can be manually programmed for most vehicles and will retain most settings even after battery disconnection or interface removal. Axxess has upgraded the LED feedback for simple, easier programming experience and provided improved, user-friendly instructions and a smaller interface box with a low-profile footprint. The entire series can be seen online at https://axxessinterfaces.com/products?search=axtc.

New Total Control Interface Products Now Shipping:

AXTC-LN11
Designed for select 2006-2012 Chevrolet, 2006-2010 Pontiac and 2007-2009 Saturn vehicles

AXTC-LN30
Designed for select 2019-up* Chevrolet, GMC and Cadillac vehicles

AXTC-LN31
Designed for select 2019-up* Chevrolet and GMC vehicles

AXTC-LN44
Designed for select 2012-2016 Chevrolet and 2012-2015 GMC vehicles

AXTC-CL2
Designed for select 2000-2013 GM vehicles, including Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile, Pontiac, SAAB and Saturn

AXTC-LN29
Designed for select 2006-up* GM vehicles, including Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn and Suzuki

AXTC-LN10
Designed for select 2016-2019 Chevrolet and 2016-2019 GMC vehicles

AXTC-BM1
Designed for select 2006-2013 BMW and 2007-2015 Mini Cooper vehicles

Product Specifications:

  • Provides accessory power (12-volt 10-amp)
  • Retains R.A.P. (retained accessory power)
  • Provides 12-volt illumination output
  • Upgraded simple LED feedback
  • Improved user-friendly instructions
  • Provides NAV outputs (parking brake, reverse, and speed sense)
  • Designed to be compatible with all major radio brands
  • Auto detects vehicle type, radio connection, and presets controls
  • Ability to dual assign steering wheel control buttons
  • Can be manually programmed for most vehicles
  • Retains memory settings even after battery disconnection or interface removal
  • Micro “B” USB updatable

*See the application chart at AxxessInterfaces.com for up-to-date, vehicle specific information.
(1) U.S. Patent No.8257147

Axxess Shipping New Plug-N-Play DSP Packages, Bluetooth and Toslink Accessories

Posted on by in Industry and tagged , .

HOLLY HILL, FL (05.22.2020) – Axxess by Metra Electronics is now shipping new AXDSP-X and AXDSP-L packages for a wide range of vehicles. These kits include the digital signal processor, a vehicle-specific wiring harness and if needed, an amplifier bypass harness and data interface for seamless integration. These new DSP kits provide everything in one convenient package and cover newer vehicle technologies, including B&O A2B amplifiers. Accessories for adding a Toslink optical output from the DSP “Lite” and audio streaming via Bluetooth are also now available. Metra Electronics continues to safely develop and ship new products from all of its warehouse locations to ensure that dealers have the solutions they need to keep their businesses running.

New Axxess DSP Packages:
The AXDSP-X features 6 inputs, 10 individually assignable outputs with a 31-band graphic EQ on each channel and high, low and bandpass filters. New packages with the AXDSP-X and a vehicle-specific T-harness included are:
● AXDSPX-A2B2: Includes data interface. Designed for B&O A2B amplifiers for Ford 2017-2019
● AXDSPX-MST1: Chevrolet 2014-2019 and GMC 2014-2018
● AXDSPX-GL10: GM 2016-2018
● AXDSPX-GL30: Chevrolet 2019-up* and GMC 2019-up*
● AXDSPX-GM31: Chevrolet 2019-up* and GMC 2019-up*
● AXDSPX-HN2: Honda 2016-up*
● AXDSPX-HN3: Honda 2016-2019
● AXDSPX-HK2: Hyundai/Kia 2011-2016
● AXDSPX-TY3: Toyota 2018-up*
● AXDSPX-VW2: Volkswagen 2016-2019, non-amplified models only

The AXDSP-L, DSP “Lite”, features 4 inputs, 6 outputs and a 15 band graphic EQ. New packages with the AXDSP-L and a vehicle-specific T-harness included are:
● AXDSPL-CH3: Chrysler 2011-2019
● AXDSPL-CH4: Chrysler 2007-2018
● AXDSPL-CH5: Chrysler 2013-Up*
● AXDSPL-FD1: Ford 2003-up*
● AXDSPL-FD2: Ford 2011-up*
● AXDSPL-GL1: GM 2006 -2012

Saddle Tramp DSP Packages:
A new water-resistant package, the AXDSPX-HD2, is now available for Harley-Davidson 2014-up* models and includes a water-resistant case and harness with the AXDSP-X. This package is also available for the same applications but with the AXDSP-L, sold as AXDSPL-HD2. A universal AXDSP-L package, the AXDSPL-HD1, has a water-resistant case and includes a harness with a rubber boot that snaps into the housing, designed for outdoor use. These Axxess packages are in stock and available now under Metra’s Saddle Tramp motorcycle accessories product line.

Bluetooth Input for DSP “Lite”:
Axxess is now shipping the AXDSPL-BT, used for adding a Bluetooth interface input for the AXDSP-L, which allows the user to stream music directly to the interface. This is ideal for use in UTVs or other powersports applications, golf carts or boats that may not have a head unit or room in the dashboard to add one. The AXDSPL-BT utilizes Bluetooth 3.0 technology for audio streaming.

Toslink Accessories for DSP “Lite”:
Optical cables for the AXDSP-L are now available from 1 to 5 meters in length. The AXDSPL-SP is used for adding an optical 2-channel output from the AXDSP-L to deliver a cleaner signal with more noise rejection. This allows installers to utilize a 2-channel Toslink input that is commonly required for certain high-end amplifiers or processors. The optical cable part numbers are AXDSPL-T1 through 5.

Axxess has recently updated all of their part numbers; the AX-DSP-X is now the AXDSP-X and the AX-DSP-LITE is now the AXDSP-L, with kits and harnesses following these same part number updates. Additional product information is available at AxxessInterfaces.com and installers can look for live webinars each month from the Metra YouTube channel to learn more about these products.

*See AxxessInterfaces.com for up-to-date, vehicle specific information.

New Axxess Webinar on Tue 5/12

Posted on by in Industry and tagged , .

Metra Electronics is hosting another webinar, “Axxess AXSWC Frequently Asked Questions ” on 5/12/20 at https://youtu.be/1vDmuep1MuU

Details: Gatlin Sandhu from Metra Electronics answers the most commonly asked installation questions for the Axxess Steering Wheel Control Interface, the AXSWC (formerly known as the ASWC-1). sdf

This video webinar will cover:

  • Identifying flashes (green and red)
  • Manual programming
  • Changing radio type
  • Step 1 of the instructions
  • Where and how to find instructions
  • Using the Axxess Updater for SWC configuration
  • Differences between data vehicles and resistive vehicles
  • Bonus feature: speed-dependent volume

Tune in to hear the solutions that will help you get this interface up and running quickly. 12volt installers can join the conversation in the live chat on Tuesday, May 12 at 3 PM EST.

Visit metraonline.com and axxessinterfaces.com for more.