MTX Can Am X3 Audio Kits Now Available for Pre-Order

PHOENIX, AZ (05.17.2021) – MTX Audio, of the MiTek Electronics and Communications Group, is announcing that pre-order is now available for their new audio kits and components for select Can-Am Maverick X3 model vehicles.

All new complete plug and play packages will be available in three, five, six or eight speaker layouts and all will incorporate 1000-watts of RMS amplifier power to drive them. They will be packaged with everything needed for installation including integrated audio and power harnesses as well as all necessary hardware. Installation of the kits requires minimal vehicle modification, and comprehensive installation videos are also available for step-by step guided instruction showing the entire process, start to finish.

Additionally, new components are also available for pre-order and consist of a low-profile dash mounting kit that works with our AWMC3 media receiver, fully assembled front upper and separate lower speaker enclosures as well as available driver and passenger loaded subwoofer enclosures.

“Consumer expectations have risen and it’s not just about power and the number of speakers anymore. Consumers need to trust that the product sounds just as good with helmets on and the throttle pinned as it does while hanging around camp.” said Director of Sales and Marketing, Jason Fickas.

“The level of thought and detail that has gone into these kits is unmatched in the industry both in performance and integration, and we’re anxious for our customers to see the results of combining the ground-up resources of MTX with a talented development team who just happen to be passionate enthusiasts as well.”

The new Can-Am X3 kits and components are slotted to start shipping in mid-June and more details can be found at MTX.com.

Code Zero Customs at the Starbird Car Show in Tulsa as an Event Sponsor

TULSA, OK (05.06.2021) – Code Zero Customs had a major presence at the recent Starbird Car Show in Tulsa. The event, the 57th Annual, was held in the Tulsa Expo Center April 30th thru May 2nd. This was the 5th year for Code Zero Customs to exhibit and the proactive Tulsa-based 12volt retailer was an event sponsor. As part of the event sponsorship there were 2500 VIP’s on the floor wearing branded Code Zero Customs lanyards.

The Code Zero Customs Booth as setup was complete.
2500 custom VIP lanyards were part of the Code Zero Customs Sponsorship package.

Cody Landis, Code Zero Customs owner, related, “Being on site with a 20×40 booth at the Starbird Car Show is always a real branding opportunity for our company. Attendees are serious automotive enthusiasts and it is a great way to showcase our brand and products to the right audience. We had 3 vehicles on display in our booth. A tricked out Lexus 350, 2014 Chevy Silverado and ’59 Ford. Each vehicle showcased our custom work and put smiles on faces. By design we did not have any products for sale in the booth. The Lexus 350 featured AudioFrog products and the Silverado featured JL Audio gear.”

The Chevy Silverado demo was set to draw attention.
The custom work in the Lexus 350 showcased Code Zero Customs’ work.

Continuing, Landis offered, “But we definitely struck deals and set up four appointments for new business at the show. The Tuesday following the show we sold another 3 very nice jobs. One job in particular was a custom console the gentleman saw in our Silverado demo in the booth.”

During the event, the Code Zero Customs store was closed as Bobby and Jinny joined Cody working the booth.

The Starbird Car Show filled the Tulsa Expo Center.
Cody Landis (L) pictured with Joe and Amanda Martin from Martin Brothers Customs and ‘Iron Resurrection’ Show.

The Tulsa Expo Center covers 450,000 square feet was filled with hot rods, custom cars, consumer activities and more.

Visit codezerocustoms.com for more.

Kustom Car Solutions Seeking 12 Volt Installer – Elmhurst, IL

Kustom Car Solutions is currently searching for a highly qualified 12 volt installer

Experience within the mobile electronic industry as cars; semi-trucks and motorcycles is preferred, but we are willing to train. Must have some experience working with cars.

Qualification: This position requires automotive or electrical/electronics experience 5+ years of car audio; mobile video experience. Encompassing a broad range of vehicles and audio systems. Knowledgeable on foreign cars also.

Kustom Car Solutions is a reputable shop who strives to always create quality work and provide excellent customer service. We consistently stay on top of the automotive aftermarket trends and new products in the automotive electronics industry.

We can install from basic car stereo installation to fully custom fabricated audio systems. We take pride in our products, craft and being able to provide quality installations that will serve our clients for years to come.

Attention to detail along with strong problem solving skills; must have a great work ethic and positive attitude.

Tools: Technicians are required to have their own basic 12v installation tools.

Email kustomcarsolutions@gmail.com or call 630-433-2214.

Alpine Seeking Product Planner – Auburn Hills, MI

Alpine Electronics of America, Inc. is the industry-leading manufacturer of high performance mobile electronics. Alpine is the only manufacturer specializing in mobile multimedia, an integrated system approach incorporating digital entertainment, security and navigation products for your mobile entertainment. As a consolidated subsidiary of Alps Electric Co., Ltd., one of the world’s premier manufacturers of electronic components for computer, communications and car electronic equipment, Alpine is the specialized supplier of quality mobile electronics systems.

Job Summary:

The Product Planner will conduct research, evaluates new products/technologies and consumer/market trends toward product/market requirements, business case and development feasibility. 

How to Apply:

To view the full job description and/or apply online please follow the link below.

https://recruiting2.ultipro.com/ALP1010AEOAI/JobBoard/19b82ab4-a57b-4b94-bd3e-7704a9598a65/OpportunityDetail?opportunityId=256eee0a-fe71-4fea-a183-2c6d9cfbf3f8

Alpine offers competitive salaries with a great work environment. Our comprehensive employee benefits package includes: 

  • PPO Health Benefits (medical/dental/vision): Effective on Start Date
  • 401(k) Retirement Plan with Company Match
  • Opportunity for Annual Bonuses
  • Generous PTO and Holiday Schedule
  • Flexible Spending Accounts
  • Employee Assistance Program
  • Employee Product Purchase Discounts
  • Wellness Reimbursement Program
  • Life, AD&D, Short and Long-Term Disability Insurances

Alpine values its members as individuals and is committed to forming an energetic and attractive company where the quality of work is enhanced.

Alpine Electronics of America, Inc. is an Equal Opportunity Employer. It is the policy of Alpine to consider all job applications on the basis of merit without regard to race, color, religion, gender, pregnancy, age, national origin, ancestry, marital status, veteran status, disability, medical condition, sexual orientation, or any other protected characteristic.

Tint World Names New Director of Franchise Operations

BOCA RATON, FL (04.13.2021) —Tint World Automotive Styling Centers, a leading window tinting and automotive accessory franchise, has added Kelly Wruck as director of franchise operations at their headquarters.

In her role, Wruck will serve as the point-of-contact for new owners. She will be responsible for onboarding new franchisees as well as take part in project management across multiple departments.

Kelly Wruck

“Kelly has more than 10 years of experience in the franchising industry and that knowledge will be a great asset to Tint World,” said Charles J. Bonfiglio, CEO and president of Tint World. “We have an amazing headquarters staff that contributes to our excellence as a leading franchise brand on a daily basis, and Kelly will add value to that team.”

Wruck will help new owners set up their locations while also distributing information to the departments at the headquarters. In addition to helping franchisees set up their stores, she will assist in the compliance department by working with new owners on their taxes, leases, and franchise development.

“I’m excited to be a part of the onboarding team, welcoming new location owners to the Tint World family,” Wruck said. “As new owners come on board, there can be a brief learning period – both from a legal and an informational standpoint. I’m pleased to help guide them through these important first steps in owning a franchise location.”

Before joining Tint World, Wruck worked in sales and logistics for companies such as Straus Building Solutions, Beerhead Bar & Eatery and United Franchise Group. In her roles with these companies, she aided in acquiring accounts for franchisees as well as developed business plans while leading franchisees through the onboarding process. Wruck is also a former police officer and has worked for the Department of Homeland Security.

Tint World Automotive Styling Centers offer sales and installation of auto accessories, mobile electronics, audio video equipment, security systems, custom wheels and tire packages, window tinting, vehicle wraps, paint protection films, detailing services, nano ceramic coatings, maintenance and repair services, and more.

Visit tintworld.com for more.

DS18 Releases the Powerful 6×9 PRO-FR69NEO

MIAMI GARDENS, FL (03.04.2021) Versatility is paramount in large and small audio systems alike. Many DS18 fans have been asking for a more powerful 6×9 so they can get clear and loud sound from their 6×9 speaker placement.

Rob Ferro, MR DS18 stated “We heard them and we have answered the overwhelming requests by releasing our new DS18 PRO-FR69NEO. This Neodymium driven midrange speaker will be the loudest 6×9 we have while also handling the most power. The great thing about NEO motor structure is that you get better performance, higher wattage handing, better efficiency and a much lighter weight than with a traditional speaker with a ferrite motor structure.”

The PRO-FR69NEO is a 4 ohm speaker that handles 250 watts RMS and 500 MAX power with a DB sensitivity rating of 98db. This NEO also has a built in bullet resonator to help the screaming midrange all the way from 100hz to 9000hz with extreme clarity and loudness.

“The PRO-FR69PRO does not disappoint from a company that says We Like It Loud,” Ferro concluded.

Visit ds18.com for more.

CRUX Expands Tangent In-Vehicle Line

CHATSWORTH, CA (02.26.2021) – CRUX has introduced the CTR-DCM. This new product is a commercial grade dual camera blind spot elimination solution for use on trucks, buses and other vehicles that use 24Volt systems.

Saif Ali Khan, CRUX staff videographer, shown with the 12.3” monitor and dual camera module.

This new product from CRUX includes a 12.3” split view LCD monitor to display separate images from the dual camera inputs. Two 10 meter extension cables are included with water resistant aviation connectors. A 64Gb micro SD card is also included.

The dual wide view cameras offer 150 and 90 degree viewing angles with AHD chip set for clear image quality.

For more see cruxinterfacing.com.

SoundShield Welcomes CE Guys Rep Firm

ANCHORAGE, AK (02.02.2021) – SoundShield, the premium sound deadening brand launched in 2019 by 12 volt industry veterans John Schwartz and Bryan Schmitt, recently welcomed CE Guys as their newest rep firm. CE Guys is representing the brand in Illinois, Wisconsin, Minnesota, North Dakota, South Dakota, Michigan, Ohio, Indiana, Kentucky, Missouri, Nebraska, Iowa, and Hawaii.

CE Guys CEO Michael Foundation pictured with a selection of SoundShield products in the FDI and rep firm’s Chicago HQ.

“We are very pleased to welcome CE Guys as our newest rep firm, along with their distribution company, FDI, that will stock SoundShield,” commented John Schwartz. The fact that the CE Guys are essentially stocking reps via their distribution company mean that SoundShield availability in all of those states represented is just a one or two day shipment time in most cases.

Michael Foundation, CEO of CE Guys said, “We absolutely love the love and enthusiasm that John and Bryan have put into every detail of the product, from packaging to point-of-sale displays. These two guys are well-respected in the industry and that carries a lot of weight with dealers. We feel comfortable that we are selling the best Sound Deadening product on the market!”

For 2021, Foundation plans to position SoundShield as the go to sound deadening brand in all of their represented states. “There is zero reason to carry another brand. We have the service, product, and relationships to make this happen. SoundShield, CE GUYS, and FDI together is the winning trifecta to dominate in our markets,” commented Foundation.

One of the advantages Schwartz noted in choosing to go with CE Guys is that they are known as the #1 powersports / motorcycle rep firm in the country. They have a long-standing background and experience in car audio, though. In addition to traditional car audio, motorcycles and powersports, CE Guys also services RV and marine sales channels. “This means we have a great opportunity for brand exposure in different retailer categories and for shops that may be unfamiliar with the category of sound deadening, acoustic treatments and road noise control,” added Schwartz.

To learn more about SoundShield, request a dealer application from soundshieldusa.com. To learn more about CE Guys and their company, visit ceguys.com

Sound Solutions Receives 2020 Best of Gulfport Awards

GULFPORT, MS (02.01.2021) – Sound Solutions has been selected for the 2020 Best of Gulfport Award in the Electronics category by the Gulfport Award Program.

Brett Shank pictured in the Sound Solutions showroom holding the 2020 Best of Gulfport Award for the Electronics Category.

Brett Shank, Sound Solutions owner, related, “Receiving this award is an honor as a local Gulfport business owner. We have been in business in Gulfport for 23 years. This is the 7th consecutive Best of Gulfport Award for Sound Solutions. We continue working to enhance our store and being recognized with this award gives a feeling of accomplishment. We feel there is only one solution and that is Sound Solutions.”

Hot rides in front of the store grab eyeballs from drivers on the busy street in front of the store.

Each year, the Gulfport Award Program identifies companies that they believe have achieved exceptional marketing success in their local community and business category. These are local companies that enhance the positive image of small business through service to their customers and the Gulfport community. These exceptional companies help make the Gulfport area a great place to live, work and play.

The Sound Solutions showroom definitely has that ‘WOW factor’ when customers enter the store.

Various sources of information were gathered and analyzed to choose the winners in each category. The 2020 Gulfport Award Program focuses on quality, not quantity. Winners we determined based on the information gathered both internally by the Gulfport Award Program and data provided by third parties

This panoramic shot reveals the ‘WOW Factor’ when customers enter Sound Solutions.

The Gulfport Award Program is an annual awards program honoring the achievements and accomplishments of local businesses throughout the Gulfport area. Recognition is given to those companies that have shown the ability to use their best practices and implemented programs to generate competitive advantages and long-term value.

A CNC was recently added to the Sound Solutions ‘Tool Box’ to further their custom work.

The Gulfport Award Program was established to recognize the best of local businesses in our community. Our organization works exclusively with local business owners, trade groups, professional associations and other business advertising and marketing groups. Our mission is to recognize the small business community’s contributions to the U.S. economy.

Lighting draws attention to the Sound Solutions location when sun goes down.

Visit soundsolutionsgulfport.com for more.

Accele Electronics “Charges Forward”

SANTA FE SPRINGS, CA (02.02.2021) – Accele Electronics is pleased to announce the latest addition to their growing portfolio of QI Wireless Charging Solutions, Qi Wireless charging is a much sought after feature and one that everyone with a recent model Smart Phone can benefit from. The BU-WLCTRV4 is the first offering of vehicle specific applications and is a direct replacement, snap in panel kit for America’s best-selling SUV, 2019 – 2021 Toyota RAV4 vehicles.

Qi wireless charging is typically offered as part of expensive Technology packages from vehicle manufacturers. Similar to Bluetooth 10 years ago, it’s a feature everyone can use but not readily available or even offered by Retailers. Users can now place their smart device safely out of the way and charge it while connected to the vehicle via Car Play or Android Auto. Installers will appreciate its simple installation as the kit requires no additional wiring. An additional plus, the “Plug & Play” OE design does not require use of a vehicle’s existing USB or USB C ports. Here’s a link to show simple installation.

To insure quick and reliable charging, Accele uses high power circuitry delivering 15 Watts to connected devices. To ensure safe use of the phone, the charging pad is constructed of non slip Rubber, securing the device while driving. Three status indicators display On, Charging & Charged to keep users informed. This is the perfect product for Expeditors seeking additional items to offer their dealerships and for 12 Volt Specialists to offer their Retail customers and that’s why they’ve chosen the Number 1 selling SUV in America, the Toyota RAV4 as its first application.

The BU-WLCTRV4 will be available in mid-February and pre-orders are currently being taken, contact your Accele Sales Representative.

Visit www.accele.com for more.